AXT610 ShowLink Access Point

AXT610 ShowLink Access Point

Enables ShowLink™ remote control of all Axient transmitter functions, including gain adjustment and frequency change, by creating a wireless network connection between linked transmitters and receivers

  • Real-time wireless remote control of up to 16 transmitters per ShowLink™ Access Point
  • Remotely adjust and change gain, frequency, and RF mute
  • Automated channel selection independently scans 2.4 GHz frequency range and determines best channel for use
  • Automatic frequency agility moves a ShowLink™ network to the best available 2.4 GHz channel in the event of signal degradation

Product Details

Features

ShowLink® Remote Control enables comprehensive, real-time control of transmitters and the unprecedented ability to make instantaneous remote adjustments to all transmitter settings. The AXT610 ShowLink® Access Point establishes a wireless network connection between linked Axient transmitters and receivers, enabling real-time networked control over a wide coverage area, equivalent to the range of Axient transmitters. Each access point supports up to 16 transmitters, and additional Access Points can be added for larger systems or to enhance range as needed. The ShowLink™ Directional Antenna can be added for even greater range performance.

Features

ShowLink® Remote Control

  • Enables a 2.4 GHz wireless network connection with linked Axient transmitters and receivers.
  • Real-time wireless remote control of up to 16 transmitters per ShowLink® Access Point.
  • Remote gain adjustability: Remotely adjust a performer’s transmitter gain in real time.
  • Remote frequency change: Execute a synchronized frequency change with a linked receiver in a split second.
  • Remote RF Mute: Conserves power and RF spectrum.
  • Remotely edit transmitter name and device ID.
  • ShowLink™ test mode measures Link Quality Index (LQI) to determine ShowLink® network coverage area.

Simple Setup

  • Automated channel selection independently scans 2.4 GHz frequency range and determines best channel for use.
  • Power over Ethernet (PoE) receives power over Ethernet network connection, or the device can be powered with an external power supply (PS41).
  • Easy transmitter authentication immediately recognizes linked transmitters upon IR sync.
  • Versatile mounting options to fit readily-available microphone stand adapters and features built-in threading for permanent installation.

Coverage

  • Wide coverage area equivalent to the range of Axient transmitters with an automatic transfer between multiple access points for extended range.
  • Automatic frequency agility moves a ShowLink® network to the best available 2.4 GHz channel in the event of signal degradation.
  • Can be used with optional directional antenna to enhance coverage
Specifications
Component Material Extruded Aluminum
Power Requirements Power over Ethernet (PoE) Class 1: 36 to 57 VDC/VAC External Power Supply (if PoE is unavailable): 15 V DC (600 mA), double insulated

Additional specifications are available in the user guide.

Accessories

    PS43US

    Energy-efficient external switching mode 15V DC power supply for use with GLXD4, ULXS4, ULXP4, P9T, PS9, SBC-DC, and AXT610.

    from $24

Software & Downloads

Brochures

File Language Type File Size
Axient Wireless Brochure English PDF 1.4 mb

CAD Drawings

File Language Type File Size
AXT610 CAD Drawings English ZIP 1.35 mb

Specification Sheets

File Language Type File Size
AXT610 Specification Sheet English PDF 55.4 kb

User Guides

File Language Type File Size
AXT610 User Guide English PDF 1.25 mb

Firmware

AXT610 - Axient ShowLink Access Point (1.7.5) See release notes

Posted January 24, 2012

NOTES

  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.7.5:
    • UR4 UHF-R receiver 1.166
    • UR3 Plug-on Transmitter 1.0.0.9
    • UR5 Portable Diversity Receiver 1.0.0.13
    • ULXD4 ULXD Receiver 1.0.3
    • P10T PSM1000 Transmitter 1.3.1 Beta
    • Wireless Workbench 6.2.1.34 Beta

AXT610 - Axient ShowLink Access Point (1.8.8) See release notes

Posted April 02, 2012

NOTES

  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.8.8:
    • UR4 UHF-R receiver - 1.166
    • UR3 Plug-on Transmitter - 1.0.0.9
    • UR5 Portable Diversity Receiver - 1.0.0.13
    • ULXD4 ULXD Receiver - 1.0.3
    • P10T PSM1000 Transmitter - 1.3.4 Beta
    • Wireless Workbench - 6.3.0 Beta

AXT610 - Axient ShowLink Access Point (1.9.2) See release notes

Posted July 09, 2012

NOTES

  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.9.2:
    • UR4 UHF-R receiver 1.166
    • UR3 Plug-on Transmitter 1.0.0.9
    • UR5 Portable Diversity Receiver 1.0.0.13
    • ULXD4 ULXD Receiver 1.2.14
    • P10T PSM1000 Transmitter 1.3.4
    • Wireless Workbench 6 Beta version 6.4.0 Beta

AXT610 - Axient ShowLink Access Point (1.10.2) See release notes

Posted October 03, 2012

NOTES

  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.10.2:
    • UR4 UHF-R receiver 1.166
    • UR3 Plug-on Transmitter 1.0.0.9
    • UR5 Portable Diversity Receiver 1.0.0.13
    • ULXD4 ULXD Receiver 1.2.14
    • P10T PSM1000 Transmitter 1.3.4
    • Wireless Workbench 6 Beta version 6.5.0

AXT610 - Axient ShowLink Access Point (1.11.14) See release notes

Posted March 21, 2013

NOTES

  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.11.14:
    • UR4 UHF-R receiver 1.166
    • UR3 Plug-on Transmitter 1.0.0.9
    • UR5 Portable Diversity Receiver 1.0.0.13
    • ULXD4 ULXD Receiver 1.2.14
    • P10T PSM1000 Transmitter 1.3.4
    • Wireless Workbench 6 Beta version 6.6.0

AXT610 - Axient ShowLink Access Point (1.12.8) See release notes

Posted May 02, 2013

NOTES

  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.12.8:
    • UR4 UHF-R receiver 1.166
    • UR3 Plug-on Transmitter 1.0.0.9
    • UR5 Portable Diversity Receiver 1.0.0.13
    • ULXD4 ULXD Receiver 1.2.14
    • P10T PSM1000 Transmitter 1.3.4
    • Wireless Workbench 6 Beta version 6.6.1

AXT610 - Axient ShowLink Access Point (1.13.5) See release notes

Posted July 15, 2013

NOTES

  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.12.8:
    • UR4 UHF-R receiver 1.166
    • UR3 Plug-on Transmitter 1.0.0.9
    • UR5 Portable Diversity Receiver 1.0.0.13
    • ULXD4 ULXD Receiver 1.2.14
    • P10T PSM1000 Transmitter 1.3.4
    • Wireless Workbench 6 Beta version 6.8.0

AXT610 - Axient ShowLink Access Point (1.14.6) See release notes

Posted January 24, 2014

NOTES

  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.14.6:
    • UR4 UHF-R receiver 1.171
    • UR3 Plug-on Transmitter 1.0.0.16
    • UR5 Portable Diversity Receiver 1.0.0.13
    • ULXD4 ULXD Receiver 1.4.14
    • P10T PSM1000 Transmitter 1.3.9
    • Wireless Workbench 6.9.0

AXT610 - Axient ShowLink Access Point (1.15.3) See release notes

Posted June 24, 2014

NOTES

  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.15.3:
    • UR4 UHF-R receiver 1.171
    • UR3 Plug-on Transmitter 1.0.0.16
    • UR5 Portable Diversity Receiver 1.0.0.13
    • ULXD4x ULX-D Receivers 1.5.6
    • QLXD4 QLX-D Receiver 1.0.13
    • P10T PSM1000 Transmitter 1.3.9
    • Wireless Workbench 6.10.0

AXT610 - Axient ShowLink Access Point (1.16.11) See release notes

Posted November 17, 2015

NOTES

  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.16.11:
    • UR4 UHF-R receiver 1.171
    • UR3 Plug-on Transmitter 1.0.0.16
    • UR5 Portable Diversity Receiver 1.0.0.13
    • ULXD4X ULX-D Receivers 1.6.11
    • QLXD4 QLX-D Receiver 1.1.15
    • P10T PSM1000 Transmitter 1.3.9
    • Wireless Workbench 6.11.3

Product Support

Get Live Support

We ♥ Subscribers

Sign up for the chance to win 1 of 5 exclusive swag packages awarded monthly, including a tee-shirt you can’t get anywhere else. You’ll also get our monthly Shure Notes® digest with how-to tips, product info, artist news, event invitations, and special promotions, plus occasional timely offers and announcements.