AXT100 Bodypack Transmitter

AXT100 Bodypack Transmitter

Rechargeable, remotely controllable bodypack transmitter for use with Axient Wireless Systems.

  • Ultra-linear RF performance maximizes channel capacity in challenging environments
  • Comprehensive real-time remote control of all transmitter parameters
  • Strong, durable, and lightweight metal case built for professional use
  • Advanced lithium-ion batteries provide up to 9.5 hours of run time
Find a Dealer

Product Details

Features

Combining the most advanced features and precision performance, the AXT100 Axient Bodypack Transmitter from Shure is a giant leap forward in wireless transmitters. The AXT100 delivers ultra-linear RF performance for more channels on air and superb audio quality. Advanced power management provides extended, rechargeable battery life and highly accurate status metering. ShowLink® Remote Control enables comprehensive real-time remote control of all transmitter parameters, including real-time frequency adjustments.

Features

Electronics

  • Ultra-linear RF performance maximizes available channel capacity in challenging RF environments.
  • IR Sync establishes connection of transmitter to receiver with one touch over infrared.
  • Switchable 10/50mW RF power levels to extend run times or increase signal strength.
  • Up to 80 MHZ tuning range matched to UHF-R transmitter ranges.

Design

  • Strong, durable, and lightweight metal case with compact design built for professional use.
  • Moisture-resistant to withstand the demands of extreme performances, weather or wardrobe.
  • Lockable user interface prevents accidental or inadvertent changes to system controls once settings are made.
  • Advanced control menu to adjust frequency, audio and security settings from the transmitter.
  • Removable antenna protects in staging, storage and transit; replaceable in event of damage.
  • High-quality backlit display provides clear view and control of all transmitter functions in low- or bright-light environments.

Power Management

  • Advanced lithium-ion batteries provide reliable, rechargeable power with up to 8 hours of run time.
  • Real-time metering reports remaining battery power in hours and minutes on transmitters, receivers and WWB6 to within 15-minutes’ accuracy.
  • Zero memory effect through lithium-ion chemistry eliminates the memory effect problems inherent inprevious generations of rechargeable batteries.
  • Rapid charging brings batteries to 50% capacity within 1 hour.
  • Integrated battery design seamlessly and securely locks the rechargeable battery into transmitter body.
  • Interchangeable 3-AA back-up sled for use as an additional powering option.

ShowLink® Remote Control

  • Comprehensive real-time remote control of all transmitter parameters.
    • Remote gain adjustability: Remotely adjust a performer’s transmitter gain in real time.
    • Remote frequency change: Execute a synchronized frequency change with a linked receiver in a split second.
    • Remote RF Mute: Conserves power and RF spectrum.

Available Options

AXT100 LEMO3 Axient Bodypack with LEMO3 Input
AXT100 TA4M Axient Bodypack with TA4M Input
Accessories

Software & Downloads

Brochures

File Language Type File Size
Axient Wireless Brochure English PDF 1.4 mb

CAD Drawings

File Language Type File Size
AXT100 CAD Drawings English ZIP 3.02 mb

Specification Sheets

File Language Type File Size
AXT100 Specification Sheet English PDF 64.1 kb

User Guides

File Language Type File Size
AXT100 User Guide English PDF 1.88 mb

Firmware

AXT100 - Axient Bodypack Transmitter (1.7.5) See release notes

Posted January 24, 2012

NOTES

  • Transmitters to be used with receivers must be updated via IR. After updating the receiver, select Tx > IR Presets > FW Update from the receiver menu and align the infrared ports with the transmitter before selecting ‘Download’.
  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.7.5:
    • UR4 UHF-R receiver 1.166
    • UR3 Plug-on Transmitter 1.0.0.9
    • UR5 Portable Diversity Receiver 1.0.0.13
    • ULXD4 ULXD Receiver 1.0.3
    • P10T PSM1000 Transmitter 1.3.1 Beta
    • Wireless Workbench 6.2.1.34 Beta

AXT100 - Axient Bodypack Transmitter (1.8.8) See release notes

Posted April 02, 2012

NEW FEATURES

  • Support for the following Axient transmitter frequency Bands: MA24, G1E, H4E, J5E, MJBX, K4E, L3E, M8, P8, P9, Q5
  • Axient transmitters now support custom groups.
  • Axient and UHF-R transmitters can get Custom Groups from the AXT400 receiver via IR Sync (from AXT400 menu select Tx>IR Presets>CG, select ‘Sync Custom Groups’ and then IR Sync the transmitter).

NOTES

  • Transmitters to be used with receivers must be updated via IR. After updating the receiver, select Tx>IR Presets>FW Update from the receiver menu and align the infrared ports with the transmitter before selecting ‘Download’.
  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.8.8:
    • UR4 UHF-R receiver - 1.166
    • UR3 Plug-on Transmitter - 1.0.0.9
    • UR5 Portable Diversity Receiver - 1.0.0.13
    • ULXD4 ULXD Receiver - 1.0.3
    • P10T PSM1000 Transmitter - 1.3.4
    • Wireless Workbench - 6.3.1 Beta

AXT100 - Axient Bodypack Transmitter (1.9.2) See release notes

Posted July 09, 2012

IMPROVEMENTS

  • Improved ShowLink connectivity in environments with high Wi Fi activity
    • Transmitter remote control link is maintained under higher ratios of Wi Fi traffic to ShowLink messages, resulting in fewer instances of transmitters falling offline.

NOTES

  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.9.2:
    • UR4 UHF-R receiver 1.166
    • UR3 Plug-on Transmitter 1.0.0.9
    • UR5 Portable Diversity Receiver 1.0.0.13
    • ULXD4 ULXD Receiver 1.2.14
    • P10T PSM1000 Transmitter 1.3.4
    • Wireless Workbench 6 Beta version 6.4.0

AXT100 - Axient Bodypack Transmitter (1.10.2) See release notes

Posted October 03, 2012

NEW FEATURES

  • Transmitter Overload indicator
    • Indication from the transmitter is available via ShowLink when the audio input circuitry is overloaded.  Previously displayed only on the transmitter, this alert now appears on the AXT400 front panel display and is available in Wireless Workbench 6 monitoring views when the transmitter is online.

IMPROVEMENTS

  • Confirmation for interference-prompted frequency switches when transmitter is offline
    • Additional prompt to avoid unintentionally changing frequency when a linked transmitter is not online to follow the change

NOTES

  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.10.2:
    • UR4 UHF-R receiver 1.166
    • UR3 Plug-on Transmitter 1.0.0.9
    • UR5 Portable Diversity Receiver 1.0.0.13
    • ULXD4 ULXD Receiver 1.2.14
    • P10T PSM1000 Transmitter 1.3.4
    • Wireless Workbench 6 Beta version 6.5.0

AXT100 - Axient Bodypack Transmitter (1.11.14) See release notes

Posted March 21, 2013

NEW FEATURES

  • Hardware Identification in WWB6
    • Enables the user to trigger a flashing sequence from the physical device to locate the Wireless Workbench 6 representation of that device in the software.
    • To engage, quickly tap the power button on the transmitter.

IMPROVEMENTS

  • AXT400 B receiver supports new transmitter bands including J5HK, G12, and H12

NOTES

  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.11.14:
    • UR4 UHF-R receiver 1.166
    • UR3 Plug-on Transmitter 1.0.0.9
    • UR5 Portable Diversity Receiver 1.0.0.13
    • ULXD4 ULXD Receiver 1.2.14
    • P10T PSM1000 Transmitter 1.3.4
    • Wireless Workbench 6 Beta version 6.6.0

AXT100 - Axient Bodypack Transmitter (1.12.8) See release notes

Posted May 02, 2013

IMPROVEMENTS

  • New models for transmitter frequency bands
    • G7C, G19, H18, J12, L20, R16
  • AXT400C receiver supports new transmitter frequency band: R16

NOTES

  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.12.8:
    • UR4 UHF-R receiver 1.166
    • UR3 Plug-on Transmitter 1.0.0.9
    • UR5 Portable Diversity Receiver 1.0.0.13
    • ULXD4 ULXD Receiver 1.2.14
    • P10T PSM1000 Transmitter 1.3.4
    • Wireless Workbench 6 Beta version 6.6.1

AXT100 - Axient Bodypack Transmitter (1.13.5) See release notes

Posted July 15, 2013

Release Date: 7/15/2013

NOTES

  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.12.8:
    • UR4 UHF-R receiver 1.166
    • UR3 Plug-on Transmitter 1.0.0.9
    • UR5 Portable Diversity Receiver 1.0.0.13
    • ULXD4 ULXD Receiver 1.2.14
    • P10T PSM1000 Transmitter 1.3.4
    • Wireless Workbench 6 Beta version 6.8.0

AXT100 - Axient Bodypack Transmitter (1.14.6) See release notes

Posted January 24, 2014

NEW FEATURES

Hardware Identify trigger

  • The trigger for Hardware Identify of AXT100 in WWB6 is a 1-second press and hold of the Set button on AXT100 when they are linked, online and at the root home screen.

NOTES

  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.14.6:
    • UR4 1.171
    • UR3 1.0.0.16
    • UR5 1.0.0.13
    • ULXD4 ULXD Receiver 1.4.14
    • P10T 1.3.9
    • Wireless Workbench 6.9.

AXT100 - Axient Bodypack Transmitter (1.15.3) See release notes

Posted June 25, 2014

NOTES

  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.15.3:
    • UR4 UHF-R receiver 1.171
    • UR3 Plug-on Transmitter 1.0.0.16
    • UR5 Portable Diversity Receiver 1.0.0.13
    • ULXD4x ULX-D Receivers 1.5.6
    • QLXD4 QLX-D Receiver 1.0.13
    • P10T PSM1000 Transmitter 1.3.9
    • Wireless Workbench 6.10.0

AXT100 - Axient Bodypack Transmitter (1.16.11) See release notes

Posted November 17, 2015

NEW FEATURES

  • Option added for configuring the power button as a trigger of Talk Switch.

NOTES

  • Transmitters to be used with receivers must be updated via IR. After the receiver is updated, go to the receiver menu: Tx > IRPresets > FWUpdate. Align the infrared ports with the transmitter and press Download.
  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.16.11:
    • UR4 UHF-R receiver 1.171
    • UR3 Plug-on Transmitter 1.0.0.16
    • UR5 Portable Diversity Receiver 1.0.0.13
    • ULXD4X ULX-D Receivers 1.6.11
    • QLXD4 QLX-D Receiver 1.1.15
    • P10T PSM1000 Transmitter 1.3.9
    • Wireless Workbench 6.11.3

Product Support

Get Live Support

We ♥ Subscribers

Sign up for the chance to win 1 of 5 exclusive swag packages awarded monthly, including a tee-shirt you can’t get anywhere else. You’ll also get our monthly Shure Notes® digest with how-to tips, product info, artist news, event invitations, and special promotions, plus occasional timely offers and announcements.