Axient Wireless Management Network

Axient Wireless Management Network

Comprehensive, innovative and failsafe, Axient provides highly advanced planning, setup and control capabilities as a forward-thinking response to spectrum management realities.

  • Comprehensive remote control of all transmitter parameters
  • Continuously monitor, evaluate, prioritize, queue and assign compatible UHF frequencies
  • Seamless, uninterrupted audio through simultaneous transmission on two independent frequencies
  • Detect and avoid frequency interference in a fraction of a second

System Details

The Axient® Wireless Management Network from Shure establishes a dramatic new threshold of control, convenience and confidence in RF transmission, reception and spectrum management for mission-critical audio applications.

Axient features new-to-the-world technologies that drive a range of innovative wireless audio system capabilities. Individually compelling, these features collectively represent forward-thinking innovation by Shure, and realize the most complete vision yet for the integration of RF management and control solutions in a single wireless platform.

Features

ShowLink™ Remote Control

  • Enables real-time remote adjustments of all transmitter parameters using a wireless network connection between linked Axient transmitters and receivers. Whether performers are on stage in the middle of a show, or off stage waiting for their cue, ShowLink lets engineers make crucial changes to their transmitter settings - without ever  leaving the control booth.
  • Remote frequency changes, gain adjustments, RF mute enabling, RF output power adjustments, and more are all possible over the ShowLink network.  Simply add a ShowLink Access Point to any Axient network and instantaneous wireless transmitter control is realized over a wide coverage area for up to 16 transmitters. Additional Access Points can be used to extend coverage area and increase the number of supported channels.  Real-time wireless remote control, now possible with ShowLink.  Only from Shure.

Spectrum Management

  • The Axient Spectrum Manager offers precision wideband scanning and on-board compatible frequency calculation, as well as backup frequency monitoring, ranking and deployment – all on demand. The Spectrum Manager not only captures a detailed scan of your venue and displays it graphically, it can also listen in on a particular signal or store the data from a site survey to be used later.
  • Together with Shure Wireless Workbench 6 software, Axient Spectrum Management tools open up a rich graphical interface for viewing the RF world and choosing the optimal frequencies for all wireless channels on a production.

Frequency Diversity

  • Unparalleled in wireless microphone technology, Frequency Diversity enables audio transmission from a single source on two independent radio frequencies, providing the best possible protection against interference for the most important performances.  With Frequency Diversity mode enabled, the Axient Receiver continuously analyzes signal quality and uses both frequencies to provide optimized audio on a single channel.
  • With two independent RF signals transmitting the same audio, the presence of direct RF interference on one frequency causes zero interruption.  Instead of producing annoying dropouts or audio artifacts, the receiver seamlessly and automatically switches to the other frequency, delivering clean, uninterrupted audio.

Interference Detection & Avoidance

  • Interference can come from anywhere - other wireless microphones, intercoms, digital devices – wreaking havoc with the frequencies selected to make the show happen.  Axient receivers are equipped with sensitive interference detection circuitry that alerts users when a signal is compromised.
  • In the event of signal degradation, Axient Interference Avoidance technology enables engineers to move to a clean, compatible frequency  - manually or automatically.  Respond to an alert by either manually selecting a new frequency, or, when used in conjunction with the Axient Spectrum Manager, back-up frequencies are constantly monitored, ranked, and deployed automatically the instant interference is detected.
  • Interference Detection and Avoidance delivers the confidence of knowing that no matter what happens, interference will not ruin the show.  Only Axient can provide such an incredible level of control and flexibility.

Power Management

  • Axient Power Management provides a comprehensive suite of smart, high performance batteries and chargers, with detailed visibility of critical battery parameters.
    • View remaining battery power accurate to within 15 minutes on transmitters, receivers and WWB6
    • Monitor percentage of capacity and time to full charge, visible on the Rack Mount Charging Station and WWB6
    • Track battery health using charging cycle count and percentage of original capacity
  • Axient batteries seamlessly and securely lock into the transmitter body.  Advanced battery chemistry provides up to 9.5 hours of run-time with zero-memory effect. Batteries can be charged to 50% capacity in one hour and to full capacity in three hours.
  • Charging options start with the Rack Mount Charging Station, which offers touring-ready battery storage and charging solution with comprehensive status display.  Configurable for up to 8 bodypack or handheld batteries, it provides easy metering of all battery status parameters on the front panel display, and is fully networkable for monitoring of all charging status parameters via WWB6. Portable chargers are a compact alternative that allows convenient charging anytime, anywhere.

Wireless Workbench 6

  • Shure Wireless Workbench 6 software is the most comprehensive wireless system control available.  It provides a rich interface to manage every facet of a performance over the network, from pre-show planning to live performance monitoring.
  • Before the show, Wireless Workbench 6 utilizes saved scan files to provide detail about the RF environment from off-site, and also includes a database of TV channels based on location to help with the planning process.   When connected to the Axient Spectrum Manager, Wireless Workbench performs live RF scans and analysis, with detailed graphic overlays and device markers on a high-resolution frequency plot.
  • Comprehensive frequency coordination uses the scan data, TV channel database, and advanced compatibility algorithms to create and assign a list of clean, viable frequencies for any number of channels in a system, plus backup frequency management.
  • During the show, Wireless Workbench 6 enables live remote adjustments to networked hardware for instant changes to frequency, gain, RF output power, and more.  Customize controls in a familiar channel strip interface to show audio and RF meters, battery life, and volume control for each channel of a wireless system.  Configurable user alerts provide quick response options through the software to solve interference issues when detected, or for battery life and RF signal strength conditions.
  • Delivering the ability to coordinate, monitor, and control the most complex wireless systems all from a laptop computer, Wireless Workbench 6 truly unleashes the full power of Axient.
  • Visit the Wireless Workbench page for more information and to download
  • Visit the Wireless Workbench forum to post questions, interact with other users, and for the latest WWB news. 
Applications

Software & Downloads

Brochures

File Language Type File Size
Axient Wireless Brochure English PDF 1.4 mb

Files

File Language Type File Size
Wireless Product Spectrum Chart PDF 447 kb

Wireless Frequency Compatibility Charts

File Language Type File Size
Axient Frequency Compatibility Chart English PDF 506 kb

Specification Sheets

File Language Type File Size
Axient Wireless Specification Sheet English PDF 788 kb

User Guides

File Language Type File Size
Axient Wireless User Guide English PDF 18.2 mb

Firmware

AXT100 - Axient Bodypack Transmitter (1.7.5) See release notes

Posted January 24, 2012

NOTES

  • Transmitters to be used with receivers must be updated via IR. After updating the receiver, select Tx > IR Presets > FW Update from the receiver menu and align the infrared ports with the transmitter before selecting ‘Download’.
  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.7.5:
    • UR4 UHF-R receiver 1.166
    • UR3 Plug-on Transmitter 1.0.0.9
    • UR5 Portable Diversity Receiver 1.0.0.13
    • ULXD4 ULXD Receiver 1.0.3
    • P10T PSM1000 Transmitter 1.3.1 Beta
    • Wireless Workbench 6.2.1.34 Beta

AXT100 - Axient Bodypack Transmitter (1.8.8) See release notes

Posted April 02, 2012

NEW FEATURES

  • Support for the following Axient transmitter frequency Bands: MA24, G1E, H4E, J5E, MJBX, K4E, L3E, M8, P8, P9, Q5
  • Axient transmitters now support custom groups.
  • Axient and UHF-R transmitters can get Custom Groups from the AXT400 receiver via IR Sync (from AXT400 menu select Tx>IR Presets>CG, select ‘Sync Custom Groups’ and then IR Sync the transmitter).

NOTES

  • Transmitters to be used with receivers must be updated via IR. After updating the receiver, select Tx>IR Presets>FW Update from the receiver menu and align the infrared ports with the transmitter before selecting ‘Download’.
  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.8.8:
    • UR4 UHF-R receiver - 1.166
    • UR3 Plug-on Transmitter - 1.0.0.9
    • UR5 Portable Diversity Receiver - 1.0.0.13
    • ULXD4 ULXD Receiver - 1.0.3
    • P10T PSM1000 Transmitter - 1.3.4
    • Wireless Workbench - 6.3.1 Beta

AXT100 - Axient Bodypack Transmitter (1.9.2) See release notes

Posted July 09, 2012

IMPROVEMENTS

  • Improved ShowLink connectivity in environments with high Wi Fi activity
    • Transmitter remote control link is maintained under higher ratios of Wi Fi traffic to ShowLink messages, resulting in fewer instances of transmitters falling offline.

NOTES

  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.9.2:
    • UR4 UHF-R receiver 1.166
    • UR3 Plug-on Transmitter 1.0.0.9
    • UR5 Portable Diversity Receiver 1.0.0.13
    • ULXD4 ULXD Receiver 1.2.14
    • P10T PSM1000 Transmitter 1.3.4
    • Wireless Workbench 6 Beta version 6.4.0

AXT100 - Axient Bodypack Transmitter (1.10.2) See release notes

Posted October 03, 2012

NEW FEATURES

  • Transmitter Overload indicator
    • Indication from the transmitter is available via ShowLink when the audio input circuitry is overloaded.  Previously displayed only on the transmitter, this alert now appears on the AXT400 front panel display and is available in Wireless Workbench 6 monitoring views when the transmitter is online.

IMPROVEMENTS

  • Confirmation for interference-prompted frequency switches when transmitter is offline
    • Additional prompt to avoid unintentionally changing frequency when a linked transmitter is not online to follow the change

NOTES

  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.10.2:
    • UR4 UHF-R receiver 1.166
    • UR3 Plug-on Transmitter 1.0.0.9
    • UR5 Portable Diversity Receiver 1.0.0.13
    • ULXD4 ULXD Receiver 1.2.14
    • P10T PSM1000 Transmitter 1.3.4
    • Wireless Workbench 6 Beta version 6.5.0

AXT100 - Axient Bodypack Transmitter (1.11.14) See release notes

Posted March 21, 2013

NEW FEATURES

  • Hardware Identification in WWB6
    • Enables the user to trigger a flashing sequence from the physical device to locate the Wireless Workbench 6 representation of that device in the software.
    • To engage, quickly tap the power button on the transmitter.

IMPROVEMENTS

  • AXT400 B receiver supports new transmitter bands including J5HK, G12, and H12

NOTES

  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.11.14:
    • UR4 UHF-R receiver 1.166
    • UR3 Plug-on Transmitter 1.0.0.9
    • UR5 Portable Diversity Receiver 1.0.0.13
    • ULXD4 ULXD Receiver 1.2.14
    • P10T PSM1000 Transmitter 1.3.4
    • Wireless Workbench 6 Beta version 6.6.0

AXT100 - Axient Bodypack Transmitter (1.12.8) See release notes

Posted May 02, 2013

IMPROVEMENTS

  • New models for transmitter frequency bands
    • G7C, G19, H18, J12, L20, R16
  • AXT400C receiver supports new transmitter frequency band: R16

NOTES

  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.12.8:
    • UR4 UHF-R receiver 1.166
    • UR3 Plug-on Transmitter 1.0.0.9
    • UR5 Portable Diversity Receiver 1.0.0.13
    • ULXD4 ULXD Receiver 1.2.14
    • P10T PSM1000 Transmitter 1.3.4
    • Wireless Workbench 6 Beta version 6.6.1

AXT100 - Axient Bodypack Transmitter (1.13.5) See release notes

Posted July 15, 2013

Release Date: 7/15/2013

NOTES

  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.12.8:
    • UR4 UHF-R receiver 1.166
    • UR3 Plug-on Transmitter 1.0.0.9
    • UR5 Portable Diversity Receiver 1.0.0.13
    • ULXD4 ULXD Receiver 1.2.14
    • P10T PSM1000 Transmitter 1.3.4
    • Wireless Workbench 6 Beta version 6.8.0

AXT100 - Axient Bodypack Transmitter (1.14.6) See release notes

Posted January 24, 2014

NEW FEATURES

Hardware Identify trigger

  • The trigger for Hardware Identify of AXT100 in WWB6 is a 1-second press and hold of the Set button on AXT100 when they are linked, online and at the root home screen.

NOTES

  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.14.6:
    • UR4 1.171
    • UR3 1.0.0.16
    • UR5 1.0.0.13
    • ULXD4 ULXD Receiver 1.4.14
    • P10T 1.3.9
    • Wireless Workbench 6.9.

AXT100 - Axient Bodypack Transmitter (1.15.3) See release notes

Posted June 25, 2014

NOTES

  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.15.3:
    • UR4 UHF-R receiver 1.171
    • UR3 Plug-on Transmitter 1.0.0.16
    • UR5 Portable Diversity Receiver 1.0.0.13
    • ULXD4x ULX-D Receivers 1.5.6
    • QLXD4 QLX-D Receiver 1.0.13
    • P10T PSM1000 Transmitter 1.3.9
    • Wireless Workbench 6.10.0

AXT100 - Axient Bodypack Transmitter (1.16.11) See release notes

Posted November 17, 2015

NEW FEATURES

  • Option added for configuring the power button as a trigger of Talk Switch.

NOTES

  • Transmitters to be used with receivers must be updated via IR. After the receiver is updated, go to the receiver menu: Tx > IRPresets > FWUpdate. Align the infrared ports with the transmitter and press Download.
  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.16.11:
    • UR4 UHF-R receiver 1.171
    • UR3 Plug-on Transmitter 1.0.0.16
    • UR5 Portable Diversity Receiver 1.0.0.13
    • ULXD4X ULX-D Receivers 1.6.11
    • QLXD4 QLX-D Receiver 1.1.15
    • P10T PSM1000 Transmitter 1.3.9
    • Wireless Workbench 6.11.3

AXT200 - Axient Handheld Transmitter (1.7.5) See release notes

Posted January 24, 2012

NOTES

  • Transmitters to be used with receivers must be updated via IR. After updating the receiver, select Tx > IR Presets > FW Update from the receiver menu and align the infrared ports with the transmitter before selecting ‘Download’.
  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.7.5:
    • UR4 UHF-R receiver 1.166
    • UR3 Plug-on Transmitter 1.0.0.9
    • UR5 Portable Diversity Receiver 1.0.0.13
    • ULXD4 ULXD Receiver 1.0.3
    • P10T PSM1000 Transmitter 1.3.1 Beta
    • Wireless Workbench 6.2.1.34 Beta

AXT200 - Axient Handheld Transmitter (1.8.8) See release notes

Posted April 02, 2012

NEW FEATURES

  • Support for the following Axient transmitter frequency Bands: MA24, G1E, H4E, J5E, MJBX, K4E, L3E, M8, P8, P9, Q5
  • Axient transmitters now support custom groups.
  • Axient and UHF-R transmitters can get Custom Groups from the AXT400 receiver via IR Sync (from AXT400 menu select Tx>IR Presets>CG, select ‘Sync Custom Groups’ and then IR Sync the transmitter).

NOTES

  • Transmitters to be used with receivers must be updated via IR. After updating the receiver, select Tx>IR Presets>FW Update from the receiver menu and align the infrared ports with the transmitter before selecting ‘Download’.
  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.8.8:
    • UR4 UHF-R receiver - 1.166
    • UR3 Plug-on Transmitter - 1.0.0.9
    • UR5 Portable Diversity Receiver - 1.0.0.13
    • ULXD4 ULXD Receiver - 1.0.3
    • P10T PSM1000 Transmitter - 1.3.4
    • Wireless Workbench - 6.3.1 Beta

AXT200 - Axient Handheld Transmitter (1.9.2) See release notes

Posted July 09, 2012

IMPROVEMENTS

  • Improved ShowLink connectivity in environments with high Wi Fi activity
    • Transmitter remote control link is maintained under higher ratios of Wi Fi traffic to ShowLink messages, resulting in fewer instances of transmitters falling offline.

NOTES

  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.9.2:
    • UR4 UHF-R receiver 1.166
    • UR3 Plug-on Transmitter 1.0.0.9
    • UR5 Portable Diversity Receiver 1.0.0.13
    • ULXD4 ULXD Receiver 1.2.14
    • P10T PSM1000 Transmitter 1.3.4
    • Wireless Workbench 6 Beta version 6.4.0 Beta

AXT200 - Axient Handheld Transmitter (1.10.2) See release notes

Posted October 03, 2012

NEW FEATURES

  • Transmitter Overload indicator
    • Indication from the transmitter is available via ShowLink when the audio input circuitry is overloaded.  Previously displayed only on the transmitter, this alert now appears on the AXT400 front panel display and is available in Wireless Workbench 6 monitoring views when the transmitter is online.

IMPROVEMENTS

  • Confirmation for interference-prompted frequency switches when transmitter is offline
    • Additional prompt to avoid unintentionally changing frequency when a linked transmitter is not online to follow the change

NOTES

  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.10.2:
    • UR4 UHF-R receiver 1.166
    • UR3 Plug-on Transmitter 1.0.0.9
    • UR5 Portable Diversity Receiver 1.0.0.13
    • ULXD4 ULXD Receiver 1.2.14
    • P10T PSM1000 Transmitter 1.3.4
    • Wireless Workbench 6 Beta version 6.5.0 Beta

AXT200 - Axient Handheld Transmitter (1.11.14) See release notes

Posted March 21, 2013

NEW FEATURES

  • Hardware Identification in WWB6
    • Enables the user to trigger a flashing sequence from the physical device to locate the Wireless Workbench 6 representation of that device in the software.
    • To engage, quickly tap the power button on the transmitter.

IMPROVEMENTS

  • AXT400 B receiver supports new transmitter bands including J5HK, G12, and H12

NOTES

  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.11.14:
    • UR4 UHF-R receiver 1.166
    • UR3 Plug-on Transmitter 1.0.0.9
    • UR5 Portable Diversity Receiver 1.0.0.13
    • ULXD4 ULXD Receiver 1.2.14
    • P10T PSM1000 Transmitter 1.3.4
    • Wireless Workbench 6 Beta version 6.6.0

AXT200 - Axient Handheld Transmitter (1.12.8) See release notes

Posted May 03, 2013

IMPROVEMENTS

  • New models for transmitter frequency bands
    • G7C, G19, H18, J12, L20, R16
  • AXT400C receiver supports new transmitter frequency band: R16

NOTES

  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.12.8:
    • UR4 UHF-R receiver 1.166
    • UR3 Plug-on Transmitter 1.0.0.9
    • UR5 Portable Diversity Receiver 1.0.0.13
    • ULXD4 ULXD Receiver 1.2.14
    • P10T PSM1000 Transmitter 1.3.4
    • Wireless Workbench 6 Beta version 6.6.1

AXT200 - Axient Handheld Transmitter (1.13.5) See release notes

Posted July 15, 2013

NOTES

  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.12.8:
    • UR4 UHF-R receiver 1.166
    • UR3 Plug-on Transmitter 1.0.0.9
    • UR5 Portable Diversity Receiver 1.0.0.13
    • ULXD4 ULXD Receiver 1.2.14
    • P10T PSM1000 Transmitter 1.3.4
    • Wireless Workbench 6 Beta version 6.8.0

AXT200 - Axient Handheld Transmitter (1.14.6) See release notes

Posted January 24, 2014

NEW FEATURES

Hardware Identify trigger

  • The trigger for Hardware Identify of AXT200 in WWB6 is a 1-second press and hold of the Set button on AXT200 when they are linked, online and at the root home screen.

NOTES

  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.14.6:
    • UR4 UHF-R receiver 1.171
    • UR3 Plug-on Transmitter 1.0.0.16
    • UR5 Portable Diversity Receiver 1.0.0.13
    • ULXD4 ULXD Receiver 1.4.14
    • P10T PSM1000 Transmitter 1.3.9
    • Wireless Workbench 6.9.0

AXT200 - Axient Handheld Transmitter (1.15.3) See release notes

Posted June 24, 2014

NOTES

  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.15.3:
    • UR4 UHF-R receiver 1.171
    • UR3 Plug-on Transmitter 1.0.0.16
    • UR5 Portable Diversity Receiver 1.0.0.13
    • ULXD4x ULX-D Receivers 1.5.6
    • QLXD4 QLX-D Receiver 1.0.13
    • P10T PSM1000 Transmitter 1.3.9
    • Wireless Workbench 6.10.0

AXT200 - Axient Handheld Transmitter (1.16.11) See release notes

Posted November 17, 2015

Version: 1.16.11

Release Date: 11/17/2015

NOTES

  • Transmitters to be used with receivers must be updated via IR. After the receiver is updated, go to the receiver menu: Tx > IRPresets > FWUpdate. Align the infrared ports with the transmitter and press Download.
  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.16.11:
    • UR4 UHF-R receiver 1.171
    • UR3 Plug-on Transmitter 1.0.0.16
    • UR5 Portable Diversity Receiver 1.0.0.13
    • ULXD4X ULX-D Receivers 1.6.11
    • QLXD4 QLX-D Receiver 1.1.15
    • P10T PSM1000 Transmitter 1.3.9
    • Wireless Workbench 6.11.3

AXT400 - Axient Dual Channel Receiver (1.7.5) See release notes

Posted January 24, 2012

NOTES

  • Transmitters to be used with receivers must be updated via IR. After updating the receiver, select Tx > IR Presets > FW Update from the receiver menu and align the infrared ports with the transmitter before selecting ‘Download’.
  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.7.5:
    • UR4 UHF-R receiver 1.166
    • UR3 Plug-on Transmitter 1.0.0.9
    • UR5 Portable Diversity Receiver 1.0.0.13
    • ULXD4 ULXD Receiver 1.0.3
    • P10T PSM1000 Transmitter 1.3.1 Beta
    • Wireless Workbench 6.2.1.34 Beta

AXT400 - Axient Dual Channel Receiver (1.8.8) See release notes

Posted April 02, 2012

NEW FEATURES

  • Support for the following Axient transmitter frequency Bands: MA24, G1E, H4E, J5E, MJBX, K4E, L3E, M8, P8, P9, Q5
  • Support for the following Axient receiver variants: AXT400B, AXT400C
  • AXT400C receiver also supports the following UHF-R transmitter bands: A24, JBX, Q10a, Q5HK
  • The AXT400 receiver supports user-created frequency groups. Creation, editing and deployment of these groups to other receivers can be done from the front panel interface of the receiver (Radio>Options>Custom)
  • Custom Groups can also be created and edited from the AXT400 Properties panel in Wireless Workbench 6.
  • A Custom Group can include any frequency in the tunable range of the receiver. The selectable Channels within a Custom Group are filtered by the currently selected Band.
  • The Load function exports Custom Groups from a receiver over the network to other receivers of the same Model. This makes the Custom Groups available on the client receivers but does not set frequencies.
  • The Group Scan function can send Custom Groups to client Axient receivers set to the same band as the deploying receiver, and programs the client receivers with frequencies using the scan results.
  • Axient and UHF-R transmitters can get Custom Groups from the AXT400 receiver via IR Sync (from AXT400 menu select Tx>IR Presets>CG, select ‘Sync Custom Groups’ and then IR Sync the transmitter).

IMPROVEMENTS

  • Improved Front Panel Lock feature, allows some menu navigation to view settings while not allowing changes to parameters.
  • Improved resistance to interference from ultrasonic sources such as motion sensors.

KNOWN ISSUES

  • Using the AXT400 receiver as a scanning device from WWB6, the error message may appear: ‘Scanner reported no Scan ID Available’. This is triggered by a previous IR Sync operation from that receiver which included Custom Groups. The following actions will release the receiver from this state:
    • Start a scan from the receiver front panel menu (Radio>Scan, either Channel Scan or Group Scan function will clear the problem). It is not necessary to deploy the results of the scan.
    • Power cycle the receiver.

NOTES

  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.8.8:
    • UR4 UHF-R receiver - 1.166
    • UR3 Plug-on Transmitter - 1.0.0.9
    • UR5 Portable Diversity Receiver - 1.0.0.13
    • ULXD4 ULX-D Receiver - 1.0.3
    • P10T PSM1000 Transmitter - 1.3.4
    • Wireless Workbench - 6.3.1 Beta

AXT400 - Axient Dual Channel Receiver (1.9.2) See release notes

Posted July 09, 2012

NEW FEATURES

  • Support for third party control interfaces
    • The AXT400 Receiver and AXT900 Rack Charger can be monitored and controlled via command strings. The firmware update enables these devices to be controlled with programmable interfaces such as AMX and Crestron.
    • The technical bulletin which documents the command strings can be found here: http://shure.custhelp.com/app/answers/detail/a_id/5047
  • Frequency Diversity-Bodypack source indicator
    • When operating in Frequency Diversity-Bodypack mode, the AXT400 receiver now indicates which of the two RF channels is currently selected by the FD switching algorithm as the active source for the audio outputs of the receiver. The indicator ‘On’ appears beneath the ‘FD-Bp’ icon on the front panel display for the active RF channel and the same information is available in the WWB6 Properties Panel and Channel Strip for the receiver. The indicator facilitates troubleshooting if there is an acoustic problem with a microphone.

KNOWN ISSUES

  • The Unexpected Transmitter alert function is disabled when Interference Avoidance is set to ‘Off’. Unexpected Transmitter alert is a separate function from Interference Detection which alerts when signal is received from an Axient or UHF-R transmitter that is not linked to the receiver.
  • When controlling Axient devices with command strings, only a single socket should be opened per device.

NOTES

  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.9.2:
    • UR4 UHF-R receiver 1.166
    • UR3 Plug-on Transmitter 1.0.0.9
    • UR5 Portable Diversity Receiver 1.0.0.13
    • ULXD4x ULX-D Receivers 1.2.14
    • P10T PSM1000 Transmitter 1.3.4
    • Wireless Workbench 6 Beta version 6.4.0 Beta

AXT400 - Axient Dual Channel Receiver (1.10.2) See release notes

Posted October 03, 2012

NEW FEATURES

  • Tone key selection options to allow only Axient or only UHF-R transmitters for receiver audio
    • Additional options to protect the receiver from unintended transmitters
    • Default Tone Key setting automatically detects Axient or UHF-R tone key to activate the corresponding audio scheme
    • In Frequency Diversity – Bodypack mode, the receiver selects away from a radio channel receiving the wrong tone key
  • In Ear Monitor signal detection
    • The receiver can identify signals from In Ear monitor transmitters, triggering Interference Detection and Avoidance even in FM capture scenarios where the IEM carrier is much stronger than the desired signal
    • Alerts in ‘Prompt’ Interference Detection mode indicate that the interfering signal is from an IEM system
    • Detects all Shure and most competitive IEM systems

IMPROVEMENTS

  • Confirmation for interference-prompted frequency switches when transmitter is offline
    • Additional prompt to avoid unintentionally changing frequency when a linked transmitter is not online to follow the change

KNOWN ISSUES

  • When controlling Axient devices with command Strings, only a single socket should be opened per device. 

NOTES

  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.10.2:
    • UR4 UHF-R receiver 1.166
    • UR3 Plug-on Transmitter 1.0.0.9
    • UR5 Portable Diversity Receiver 1.0.0.13
    • ULXD4x ULX-D Receivers 1.2.14
    • P10T PSM1000 Transmitter 1.3.4
    • Wireless Workbench 6 Beta version 6.5.0

AXT400 - Axient Dual Channel Receiver (1.11.14) See release notes

Posted March 21, 2013

NEW FEATURES

  • Hold Audio Overload indicators on front panel metering
    • Optional feature available in receiver Audio settings.  Holds the red LED indicator on after an overload event so that it can be identified on the front panel meters after the condition has ended
    • Residual Overload indicators can be cleared from the front panel with the following key combination: ENTER + AUDIO on the home screen menu for the channel that had an overload.
    • Indicators can also be cleared from WWB6.
  • Extended range of receiver Squelch setting, the selectable range is -20 to +10 (previously -10 to +10).  Lower settings allow for increased operating range without squelch muting when operating on frequencies with low RF noise.
  • Hardware Identification in WWB6
    • Enables the user to trigger a flashing sequence from the physical device to locate the Wireless Workbench 6 representation of that device in the software.
    • To engage, quickly tap the power button on the transmitter.

IMPROVEMENTS

  • AXT400 B receiver supports new transmitter bands including J5HK, G12, and H12
  • Calibration of front panel display, may optimize contrast on some units

NOTES

  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.11.14:
    • UR4 UHF-R receiver 1.166
    • UR3 Plug-on Transmitter 1.0.0.9
    • UR5 Portable Diversity Receiver 1.0.0.13
    • ULXD4x ULX-D Receivers 1.2.14
    • P10T PSM1000 Transmitter 1.3.4
    • Wireless Workbench 6 Beta version 6.6.0

AXT400 - Axient Dual Channel Receiver (1.12.8) See release notes

Posted May 02, 2013

IMPROVEMENTS

  • New models
    • AXT400 D Receiver with support for G7C, L3E, M8, P9 transmitter bands for use in China
    • AXT400 J Receiver with support for H18, J12, L20, G19 transmitter bands for use in Japan
    • AXT400 R16 Receiver for use in Thailand
  • New bands
    • AXT400 C receiver supports new frequency band: R16
  • Talk Switch functionality supported for G12, H12 and J5HK bands.

NOTES

  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.12.8:
    • UR4 UHF-R receiver 1.166
    • UR3 Plug-on Transmitter 1.0.0.9
    • UR5 Portable Diversity Receiver 1.0.0.13
    • ULXD4x ULX-D Receivers 1.2.14
    • P10T PSM1000 Transmitter 1.3.4
    • Wireless Workbench 6 Beta version 6.6.1

AXT400 - Axient Dual Channel Receiver (1.13.5) See release notes

Posted July 15, 2013

IMPROVEMENTS

  • Supports ULX-D frequency band X51
  • Supports PSM1000 band X7

NOTES

  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.12.8:
    • UR4 UHF-R receiver 1.166
    • UR3 Plug-on Transmitter 1.0.0.9
    • UR5 Portable Diversity Receiver 1.0.0.13
    • ULXD4x ULXD Receivers 1.2.14
    • P10T PSM1000 Transmitter 1.3.4
    • Wireless Workbench 6 Beta version 6.8.0

AXT400 - Axient Dual Channel Receiver (1.14.6) See release notes

Posted January 24, 2014

IMPROVEMENTS

  • Supports UHF-R frequency band: M6.
  • Supports ULX-D frequency bands: J51/J51HD, L53/L53HD.

NOTES

  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.14.6:
    • UR4 UHF-R receiver 1.171
    • UR3 Plug-on Transmitter 1.0.0.16
    • UR5 Portable Diversity Receiver 1.0.0.13
    • ULXD4x ULX-D Receivers 1.4.14
    • P10T PSM1000 Transmitter 1.3.9
    • Wireless Workbench 6.9.0

AXT400 - Axient Dual Channel Receiver (1.15.3) See release notes

Posted June 24, 2014

IMPROVEMENTS

  • Supports updated group & channel maps for bands: G19, H18, J12, and L20
  • Supports QLX-D Digital Wireless System
    • Discovers QLX-D channels in the Find All feature

NOTES

  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.15.3:
    • UR4 UHF-R receiver 1.171
    • UR3 Plug-on Transmitter 1.0.0.16
    • UR5 Portable Diversity Receiver 1.0.0.13
    • ULXD4x ULX-D Receivers 1.5.6
    • QLXD4 QLX-D Receiver 1.0.13
    • P10T PSM1000 Transmitter 1.3.9
    • Wireless Workbench 6.10.0

AXT400 - Axient Dual Channel Receiver (1.16.11) See release notes

Posted November 17, 2015

NEW FEATURES

  • Talk Switch feature enabled on AXT400 B and AXT400 C.
  • Options added to let AES3 digital output follow XLR or TRS analog output under Talk Switch operations.
  • IR Preset added for configuring the AXT100 power button as a trigger of Talk Switch.
  • TPCI command supported to pass signal when the Talk Switch button is pressed or released.

IMPROVEMENTS

  • AXT400 J supports UHF-R bands: G1HK, H4HK, J5HK, L3HK.
  • GUI added for viewing and entering gateway and IP address to achieve cross-subnet monitoring and control.

KNOWN ISSUE

  • When an AXT400 J is set to one of the newly supported UHF-R bands (e.g. G1HK, H4HK, J5HK, L3HK), downgrading the AXT400 J unit from 1.16.11 to 1.15.3 may result in abnormal frequency indication (e.g. 0.000 MHz) as well as a change in the RF band.

NOTES

  • Transmitters to be used with receivers must be updated via IR. After the receiver is updated, go to the receiver menu: Tx > IRPresets > FWUpdate. Align the infrared ports with the transmitter and press Download.
  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.16.11:
    • UR4 UHF-R receiver 1.171
    • UR3 Plug-on Transmitter 1.0.0.16
    • UR5 Portable Diversity Receiver 1.0.0.13
    • ULXD4X ULX-D Receivers 1.6.11
    • QLXD4 QLX-D Receiver 1.1.15
    • P10T PSM1000 Transmitter 1.3.9
    • Wireless Workbench 6.11.3

AXT600 - Axient Spectrum Manager (1.7.5) See release notes

Posted January 24, 2012

NOTES

  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.7.5:
    • UR4 UHF-R receiver 1.166
    • UR3 Plug-on Transmitter 1.0.0.9
    • UR5 Portable Diversity Receiver 1.0.0.13
    • ULXD4 ULXD Receiver 1.0.3
    • P10T PSM1000 Transmitter 1.3.1 Beta
    • Wireless Workbench 6.2.1.34 Beta

AXT600 - Axient Spectrum Manager (1.8.8) See release notes

Posted April 02, 2012

NEW FEATURES

  • Support for the following Axient receiver variants: AXT400B, AXT400C

IMPROVEMENTS

  • Improved Front Panel Lock feature, allows some menu navigation to view settings while not allowing changes to parameters. 

KNOWN ISSUES

  • The old P10T firmware for production (v1.1.0) is not interoperable with the minimum Beta version (v1.3.1) that supports the networked features of Spectrum Manager and Wireless Workbench 6. When using the Axient Spectrum Manager and/or Wireless Workbench 6 with PSM1000, all P10T transmitter units to be used in the same network configuration must be updated to version 1.3.4 (which is available to download from within Wireless Workbench 6). Use the Firmware Update Manager Tool in Wireless Workbench 6 to update P10T transmitters and enable network discovery and programming with Wireless Workbench 6 and Spectrum Manager.

NOTES

  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.8.8:
    • UR4 UHF-R receiver - 1.166
    • UR3 Plug-on Transmitter - 1.0.0.9
    • UR5 Portable Diversity Receiver - 1.0.0.13
    • ULXD4 ULXD Receiver - 1.0.3
    • P10T PSM1000 Transmitter - 1.3.4 Beta
    • Wireless Workbench - 6.3.0 Beta

AXT600 - Axient Spectrum Manager (1.9.2) See release notes

Posted July 09, 2012

NEW FEATURES

  • Networked discovery and coordination of ULXD4D Dual and ULXD4Q Quad receivers.
    • Spectrum Manager discovers, coordinates and deploys frequencies for all ULX-D series receivers.
    • Spectrum Manager identifies ULX-D receivers in High Density mode and maintains frequencies valid for High Density channels.

KNOWN ISSUES

  • Very large compatible frequency lists deployed from WWB6 (>400 frequencies) may result in an unsuccessful deployment resulting in the loss of the CFL in the Spectrum Manager. When working with multiple bands of High Density channels it is recommend to unselect “Automatically Calculate Backups” in the WWB6 Coordination Preferences and add an appropriate number of requested backups via the “Add New Devices” dialog.

NOTES

  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.9.2:
    • UR4 UHF-R receiver 1.166
    • UR3 Plug-on Transmitter 1.0.0.9
    • UR5 Portable Diversity Receiver 1.0.0.13
    • ULXD4 ULXD Receiver 1.2.14
    • P10T PSM1000 Transmitter 1.3.4
    • Wireless Workbench 6 Beta version 6.4.0 Beta

AXT600 - Axient Spectrum Manager (1.10.2) See release notes

Posted October 03, 2012

NOTES

  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.10.2:
    • UR4 UHF-R receiver 1.166
    • UR3 Plug-on Transmitter 1.0.0.9
    • UR5 Portable Diversity Receiver 1.0.0.13
    • ULXD4 ULXD Receiver 1.2.14
    • P10T PSM1000 Transmitter 1.3.4
    • Wireless Workbench 6 Beta version 6.5.0

AXT600 - Axient Spectrum Manager (1.11.14) See release notes

Posted March 21, 2013

NEW FEATURES

  • Custom User Groups can be saved to the Spectrum Manager using WWB6.
    • The User Groups can be used to constrain frequency calculations run by the Spectrum Manager such that solutions come from specified ranges and sets of frequencies.
    • Once they are programmed to the device, Custom User Groups can be selected in the front panel menu Util>More>User Group then set List value to ‘Custom’.
  • Calculation for ULX-D channels in High Density mode
    • The Spectrum Manager frequency calculations treat these devices as non-Intermod sources.   Channels of this type will be considered to not generate transmitter-to-transmitter intermod products among themselves while avoiding intermods from other equipment.
    • Optimizes spectral efficiency of ULX-D High Density mode in mixed applications with other equipment types.
  • Hardware Identification in WWB6
    • Enables the user to trigger a flashing sequence from the physical device to locate the Wireless Workbench 6 representation of that device in the software.
    • To engage, quickly tap the power button on the transmitter.

IMPROVEMENTS

  • Calibration of front panel display, may optimize contrast on some units

KNOWN ISSUES

  • When a frequency list (CFL) which includes entries for ULX-D in High Density mode is deployed from WWB6 to the AXT600 Spectrum Manager there are the following known limitations:
    • The Analyze features accessed from the AXT600 front panel interface cannot perform compatibility analysis
    • The AXT600 frequency calculation tools ‘CFL>New’ and ‘Wizard>Update Freqs’ will not calculate frequencies for ULX-D High Density channels that were offline entries in WWB Inventory at the time of deployment to the Spectrum Manager.
    • Note: The AXT600 does calculate, analyze and deploy frequencies to ULX-D High Density channels that are added via the front panel interface.
  • CFL Analysis fails when the Spectrum Manager Exclusions list includes both a frequency range and a single frequency within that range.  The Analysis result indicates an Exclusions conflict even though no CFL frequencies fall within the range of defined exclusions.

NOTES

  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.11.14:
    • UR4 UHF-R receiver 1.166
    • UR3 Plug-on Transmitter 1.0.0.9
    • UR5 Portable Diversity Receiver 1.0.0.13
    • ULXD4 ULXD Receiver 1.2.14
    • P10T PSM1000 Transmitter 1.3.4
    • Wireless Workbench 6 Beta version 6.6.0

AXT600 - Axient Spectrum Manager (1.12.8) See release notes

Posted May 02, 2013

IMPROVEMENTS

  • Support new AXT400 models
    • AXT400 D 
    • AXT400 J
    • AXT400 R16
  • Support for new AXT400 frequency bands
    • AXT400 C frequency band R16

KNOWN ISSUES

  • Exclusions set by TV channel do not support Japan TV format (6 MHz channels numbered 13-52, starting at 470 MHz).  To exclude Japan TV channels from frequency calculations, it is recommended to set exclusions by frequency ranges.  For example Japan TV 13 = 470 – 476 MHz.
  • When a frequency list (CFL) which includes entries for ULX-D in High Density mode is deployed from WWB6 to the AXT600 Spectrum Manager there are the following known limitations:
    • The Analyze features accessed from the AXT600 front panel interface cannot perform compatibility analysis
    • The AXT600 frequency calculation tools ‘CFL>New’ and ‘Wizard>Update Freqs’ will not calculate frequencies for ULX-D High Density channels that were offline entries in WWB Inventory at the time of deployment to the Spectrum Manager.
  • Note: The AXT600 does calculate, analyze and deploy frequencies to ULX-D High Density channels that are added via the front panel interface.
  • CFL Analysis fails when the Spectrum Manager Exclusions list includes both a frequency range and a single frequency within that range.  The Analysis result indicates an Exclusions conflict even though no CFL frequencies fall within the range of defined exclusions.

NOTES

  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.12.8:
    • UR4 UHF-R receiver 1.166
    • UR3 Plug-on Transmitter 1.0.0.9
    • UR5 Portable Diversity Receiver 1.0.0.13
    • ULXD4 ULXD Receiver 1.2.14
    • P10T PSM1000 Transmitter 1.3.4
    • Wireless Workbench 6 Beta version 6.6.1

AXT600 - Axient Spectrum Manager (1.13.5) See release notes

Posted July 15, 2013

NEW FEATURES

  • Added new TV format option
    • The TV format is titled ‘6 MHz Japan’ and can be selected among other TV formats (6 MHz, 7 MHz, 8 MHz).
    • The new TV format starts at channel 13 and ends at channel 52, each channel with a 6 MHz bandwidth.
  • 6 MHz Japan TV format can be specified from Wireless Workbench for a Spectrum Manager.
    • The new TV format can be downloaded to a networked Spectrum Manager for frequency coordination through the TV Channels dialog.

IMPROVEMENTS

  • Supports ULX-D frequency bands X51, H50
  • Supports PSM1000 band X7
  • Supports MW4D band X7

KNOWN ISSUES

  • CFL Analysis fails when the Spectrum Manager Exclusions list includes both a frequency range and a single frequency within that range. The Analysis result indicates an Exclusions conflict even though no CFL frequencies fall within the range of defined exclusions.

NOTES

  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.12.8:
    • UR4 UHF-R receiver 1.166
    • UR3 Plug-on Transmitter 1.0.0.9
    • UR5 Portable Diversity Receiver 1.0.0.13
    • ULXD4 ULXD Receiver 1.2.14
    • P10T PSM1000 Transmitter 1.3.4
    • Wireless Workbench 6 Beta version 6.8.0

AXT600 - Axient Spectrum Manager (1.14.6) See release notes

Posted January 24, 2014

NOTES

  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.14.6:
    • UR4 UHF-R receiver 1.171
    • UR3 Plug-on Transmitter 1.0.0.16
    • UR5 Portable Diversity Receiver 1.0.0.13
    • ULXD4 ULXD Receiver 1.4.14
    • P10T PSM1000 Transmitter 1.3.9
    • Wireless Workbench 6.9.0

AXT600 - Axient Spectrum Manager (1.15.3) See release notes

Posted June 25, 2014

IMPROVEMENTS

  • Supports updated group & channel maps for bands: G19, H18, J12, and L20
  • Supports P10T frequency bands: G10J, J8J, L11J, and L8J
  • Supports QLX-D Digital Wireless System
    • Discovers QLX-D channels
    • Coordinates frequencies for QLX-D channels
  • Supports entry and maintenance of missing band information for CFL entries.
    • Requires all CFL entries edited/added from AXT600 to specify band values.

NOTES

  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.15.3:
    • UR4 UHF-R receiver 1.171
    • UR3 Plug-on Transmitter 1.0.0.16
    • UR5 Portable Diversity Receiver 1.0.0.13
    • ULXD4x ULX-D Receivers 1.5.6
    • QLXD4 QLX-D Receiver 1.0.13
    • P10T PSM1000 Transmitter 1.3.9
    • Wireless Workbench 6.10.0

AXT600 - Axient Spectrum Manager (1.16.11) See release notes

Posted November 17, 2014

IMPROVEMENTS

  • GUI added for viewing and entering gateway and IP address to achieve cross-subnet monitoring and control.
  • Supports discovery over the network ULX-D and QLX-D receivers in X52, X53 and X54 bands.*
  • Supports discovery over the network ULX-D receivers in the Z16 band.*

*AXT600 is capable of discovering ULX-D and QLX-D receivers in X52, X53, X54 and Z16 bands. AXT600 will continue to scan within the range of 470-865, 925-952MHz. In the AXT600 band summary list, any band that is not fully supported due to non-tunable frequencies is tagged with *. In the AXT600 CFL list, non-tunable frequencies are indicated with "Monitor for WWB (unknown dBm)". When listening to CFL frequencies, switching to a non-tunable frequency will turn the Listen mode off. The AXT600 CFL Edit/Add menu will allow any frequency for any band, not limited to tunable frequencies.

NOTES

  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.16.11:
    • UR4 UHF-R receiver 1.171
    • UR3 Plug-on Transmitter 1.0.0.16
    • UR5 Portable Diversity Receiver 1.0.0.13
    • ULXD4X ULX-D Receivers 1.6.11
    • QLXD4 QLX-D Receiver 1.1.15
    • P10T PSM1000 Transmitter 1.3.9
    • Wireless Workbench 6.11.3

AXT610 - Axient ShowLink Access Point (1.7.5) See release notes

Posted January 24, 2012

NOTES

  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.7.5:
    • UR4 UHF-R receiver 1.166
    • UR3 Plug-on Transmitter 1.0.0.9
    • UR5 Portable Diversity Receiver 1.0.0.13
    • ULXD4 ULXD Receiver 1.0.3
    • P10T PSM1000 Transmitter 1.3.1 Beta
    • Wireless Workbench 6.2.1.34 Beta

AXT610 - Axient ShowLink Access Point (1.8.8) See release notes

Posted April 02, 2012

NOTES

  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.8.8:
    • UR4 UHF-R receiver - 1.166
    • UR3 Plug-on Transmitter - 1.0.0.9
    • UR5 Portable Diversity Receiver - 1.0.0.13
    • ULXD4 ULXD Receiver - 1.0.3
    • P10T PSM1000 Transmitter - 1.3.4 Beta
    • Wireless Workbench - 6.3.0 Beta

AXT610 - Axient ShowLink Access Point (1.9.2) See release notes

Posted July 09, 2012

NOTES

  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.9.2:
    • UR4 UHF-R receiver 1.166
    • UR3 Plug-on Transmitter 1.0.0.9
    • UR5 Portable Diversity Receiver 1.0.0.13
    • ULXD4 ULXD Receiver 1.2.14
    • P10T PSM1000 Transmitter 1.3.4
    • Wireless Workbench 6 Beta version 6.4.0 Beta

AXT610 - Axient ShowLink Access Point (1.10.2) See release notes

Posted October 03, 2012

NOTES

  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.10.2:
    • UR4 UHF-R receiver 1.166
    • UR3 Plug-on Transmitter 1.0.0.9
    • UR5 Portable Diversity Receiver 1.0.0.13
    • ULXD4 ULXD Receiver 1.2.14
    • P10T PSM1000 Transmitter 1.3.4
    • Wireless Workbench 6 Beta version 6.5.0

AXT610 - Axient ShowLink Access Point (1.11.14) See release notes

Posted March 21, 2013

NOTES

  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.11.14:
    • UR4 UHF-R receiver 1.166
    • UR3 Plug-on Transmitter 1.0.0.9
    • UR5 Portable Diversity Receiver 1.0.0.13
    • ULXD4 ULXD Receiver 1.2.14
    • P10T PSM1000 Transmitter 1.3.4
    • Wireless Workbench 6 Beta version 6.6.0

AXT610 - Axient ShowLink Access Point (1.12.8) See release notes

Posted May 02, 2013

NOTES

  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.12.8:
    • UR4 UHF-R receiver 1.166
    • UR3 Plug-on Transmitter 1.0.0.9
    • UR5 Portable Diversity Receiver 1.0.0.13
    • ULXD4 ULXD Receiver 1.2.14
    • P10T PSM1000 Transmitter 1.3.4
    • Wireless Workbench 6 Beta version 6.6.1

AXT610 - Axient ShowLink Access Point (1.13.5) See release notes

Posted July 15, 2013

NOTES

  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.12.8:
    • UR4 UHF-R receiver 1.166
    • UR3 Plug-on Transmitter 1.0.0.9
    • UR5 Portable Diversity Receiver 1.0.0.13
    • ULXD4 ULXD Receiver 1.2.14
    • P10T PSM1000 Transmitter 1.3.4
    • Wireless Workbench 6 Beta version 6.8.0

AXT610 - Axient ShowLink Access Point (1.14.6) See release notes

Posted January 24, 2014

NOTES

  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.14.6:
    • UR4 UHF-R receiver 1.171
    • UR3 Plug-on Transmitter 1.0.0.16
    • UR5 Portable Diversity Receiver 1.0.0.13
    • ULXD4 ULXD Receiver 1.4.14
    • P10T PSM1000 Transmitter 1.3.9
    • Wireless Workbench 6.9.0

AXT610 - Axient ShowLink Access Point (1.15.3) See release notes

Posted June 24, 2014

NOTES

  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.15.3:
    • UR4 UHF-R receiver 1.171
    • UR3 Plug-on Transmitter 1.0.0.16
    • UR5 Portable Diversity Receiver 1.0.0.13
    • ULXD4x ULX-D Receivers 1.5.6
    • QLXD4 QLX-D Receiver 1.0.13
    • P10T PSM1000 Transmitter 1.3.9
    • Wireless Workbench 6.10.0

AXT610 - Axient ShowLink Access Point (1.16.11) See release notes

Posted November 17, 2015

NOTES

  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.16.11:
    • UR4 UHF-R receiver 1.171
    • UR3 Plug-on Transmitter 1.0.0.16
    • UR5 Portable Diversity Receiver 1.0.0.13
    • ULXD4X ULX-D Receivers 1.6.11
    • QLXD4 QLX-D Receiver 1.1.15
    • P10T PSM1000 Transmitter 1.3.9
    • Wireless Workbench 6.11.3

AXT630/AXT631/AXT632 - Axient Antenna Distribution Amplifier (1.7.5) See release notes

Posted January 24, 2012

NOTES

  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.7.5:
    • UR4 UHF-R receiver 1.166
    • UR3 Plug-on Transmitter 1.0.0.9
    • UR5 Portable Diversity Receiver 1.0.0.13
    • ULXD4 ULXD Receiver 1.0.3
    • P10T PSM1000 Transmitter 1.3.1 Beta
    • Wireless Workbench 6.2.1.34 Beta

AXT630/AXT631/AXT632 - Axient Antenna Distribution Amplifier (1.8.8) See release notes

Posted April 02, 2012

NOTES

  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.8.8:
    • UR4 UHF-R receiver - 1.166
    • UR3 Plug-on Transmitter - 1.0.0.9
    • UR5 Portable Diversity Receiver - 1.0.0.13
    • ULXD4 ULXD Receiver - 1.0.3
    • P10T PSM1000 Transmitter - 1.3.4 Beta
    • Wireless Workbench - 6.3.0 Beta

AXT630/AXT631/AXT632 - Axient Antenna Distribution Amplifier (1.9.2) See release notes

Posted July 09, 2012

NOTES

  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.9.2:
    • UR4 UHF-R receiver 1.166
    • UR3 Plug-on Transmitter 1.0.0.9
    • UR5 Portable Diversity Receiver 1.0.0.13
    • ULXD4 ULXD Receiver 1.2.14
    • P10T PSM1000 Transmitter 1.3.4
    • Wireless Workbench 6 Beta version 6.4.0 Beta

AXT630/AXT631/AXT632 - Axient Antenna Distribution Amplifier (1.10.2) See release notes

Posted October 03, 2012

NOTES

  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.10.2:
    • UR4 UHF-R receiver 1.166
    • UR3 Plug-on Transmitter 1.0.0.9
    • UR5 Portable Diversity Receiver 1.0.0.13
    • ULXD4 ULXD Receiver 1.2.14
    • P10T PSM1000 Transmitter 1.3.4
    • Wireless Workbench 6 Beta version 6.5.0

AXT630/AXT631/AXT632 - Axient Antenna Distribution Amplifier (1.11.14) See release notes

Posted March 21, 2013

NOTES

  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.11.14:
    • UR4 UHF-R receiver 1.166
    • UR3 Plug-on Transmitter 1.0.0.9
    • UR5 Portable Diversity Receiver 1.0.0.13
    • ULXD4 ULXD Receiver 1.2.14
    • P10T PSM1000 Transmitter 1.3.4
    • Wireless Workbench 6 Beta version 6.6.0

AXT630/AXT631/AXT632 - Axient Antenna Distribution Amplifier (1.12.8) See release notes

Posted May 02, 2013

IMPROVEMENTS

  • New models
    • AXT632 Antenna Distribution Amplifier for use in China
    • AXT630J Antenna Distribution Amplifier for use in Japan

NOTES

  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.12.8:
    • UR4 UHF-R receiver 1.166
    • UR3 Plug-on Transmitter 1.0.0.9
    • UR5 Portable Diversity Receiver 1.0.0.13
    • ULXD4 ULXD Receiver 1.2.14
    • P10T PSM1000 Transmitter 1.3.4
    • Wireless Workbench 6 Beta version 6.6.1

AXT630/AXT631/AXT632 - Axient Antenna Distribution Amplifier (1.13.5) See release notes

Posted July 15, 2013

NOTES

  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.12.8:
    • UR4 UHF-R receiver 1.166
    • UR3 Plug-on Transmitter 1.0.0.9
    • UR5 Portable Diversity Receiver 1.0.0.13
    • ULXD4 ULXD Receiver 1.2.14
    • P10T PSM1000 Transmitter 1.3.4
    • Wireless Workbench 6 Beta version 6.8.0

AXT630/AXT631/AXT632 - Axient Antenna Distribution Amplifier (1.14.6) See release notes

Posted January 24, 2014

NOTES

  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.14.6:
    • UR4 UHF-R receiver 1.171
    • UR3 Plug-on Transmitter 1.0.0.16
    • UR5 Portable Diversity Receiver 1.0.0.13
    • ULXD4 ULXD Receiver 1.4.14
    • P10T PSM1000 Transmitter 1.3.9
    • Wireless Workbench 6.9.0

AXT630/AXT631/AXT632 - Axient Antenna Distribution Amplifier (1.15.3) See release notes

Posted June 24, 2014

NOTES

  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.15.3:
    • UR4 UHF-R receiver 1.171
    • UR3 Plug-on Transmitter 1.0.0.16
    • UR5 Portable Diversity Receiver 1.0.0.13
    • ULXD4x ULX-D Receivers 1.5.6
    • QLXD4 QLX-D Receiver 1.0.13
    • P10T PSM1000 Transmitter 1.3.9
    • Wireless Workbench 6.10.0

AXT630/AXT631/AXT632 - Axient Antenna Distribution Amplifier (1.16.11) See release notes

Posted November 17, 2015

IMPROVEMENTS

  • Graphic User Interface (GUI) added for viewing and entering gateway and IP address to achieve cross-subnet monitoring and control.

NOTES

  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.16.11:
    • UR4 UHF-R receiver 1.171
    • UR3 Plug-on Transmitter 1.0.0.16
    • UR5 Portable Diversity Receiver 1.0.0.13
    • ULXD4X ULX-D Receivers 1.6.11
    • QLXD4 QLX-D Receiver 1.1.15
    • P10T PSM1000 Transmitter 1.3.9
    • Wireless Workbench 6.11.3

AXT900 - Axient Rackmount Charging Station (1.7.5) See release notes

Posted January 24, 2012

NOTES

  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.7.5:
    • UR4 UHF-R receiver 1.166
    • UR3 Plug-on Transmitter 1.0.0.9
    • UR5 Portable Diversity Receiver 1.0.0.13
    • ULXD4 ULXD Receiver 1.0.3
    • P10T PSM1000 Transmitter 1.3.1 Beta
    • Wireless Workbench 6.2.1.34 Beta

AXT900 - Axient Rackmount Charging Station (1.8.8) See release notes

Posted April 02, 2012

NOTES

  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.8.8:
    • UR4 UHF-R receiver - 1.166
    • UR3 Plug-on Transmitter - 1.0.0.9
    • UR5 Portable Diversity Receiver - 1.0.0.13
    • ULXD4 ULXD Receiver - 1.0.3
    • P10T PSM1000 Transmitter - 1.3.4 Beta
    • Wireless Workbench - 6.3.0 Beta

AXT900 - Axient Rackmount Charging Station (1.9.2) See release notes

Posted July 09, 2012

NEW FEATURES

  • Support for third party control interfaces
    • The AXT400 Receiver and AXT900 Rack Charger can be monitored and controlled via command strings. The firmware update enables these devices to be controlled with programmable interfaces such as AMX and Crestron.
    • The technical bulletin which documents the command strings can be found here: http://shure.custhelp.com/app/answers/detail/a_id/5047

KNOWN ISSUES

  • When controlling Axient devices with command strings, only a single socket should be opened per device.

NOTES

  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.9.2:
    • UR4 UHF-R receiver 1.166
    • UR3 Plug-on Transmitter 1.0.0.9
    • UR5 Portable Diversity Receiver 1.0.0.13
    • ULXD4 ULXD Receiver 1.2.14
    • P10T PSM1000 Transmitter 1.3.4
    • Wireless Workbench 6 Beta version 6.4.0 Beta

AXT900 - Axient Rackmount Charging Station (1.10.2) See release notes

Posted October 03, 2012

KNOWN ISSUES

  • When controlling Axient devices with command Strings, only a single socket should be opened per device.

NOTES

  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.10.2:
    • UR4 UHF-R receiver 1.166
    • UR3 Plug-on Transmitter 1.0.0.9
    • UR5 Portable Diversity Receiver 1.0.0.13
    • ULXD4 ULXD Receiver 1.2.14
    • P10T PSM1000 Transmitter 1.3.4
    • Wireless Workbench 6 Beta version 6.5.0 Beta

AXT900 - Axient Rackmount Charging Station (1.11.14) See release notes

Posted October 21, 2013

NOTES

  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.11.14:
    • UR4 UHF-R receiver 1.166
    • UR3 Plug-on Transmitter 1.0.0.9
    • UR5 Portable Diversity Receiver 1.0.0.13
    • ULXD4 ULXD Receiver 1.2.14
    • P10T PSM1000 Transmitter 1.3.4
    • Wireless Workbench 6 Beta version 6.6.0

AXT900 - Axient Rackmount Charging Station (1.12.8) See release notes

Posted May 02, 2013

NOTES

  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.12.8:
    • UR4 UHF-R receiver 1.166
    • UR3 Plug-on Transmitter 1.0.0.9
    • UR5 Portable Diversity Receiver 1.0.0.13
    • ULXD4 ULXD Receiver 1.2.14
    • P10T PSM1000 Transmitter 1.3.4
    • Wireless Workbench 6 Beta version 6.6.1

AXT900 - Axient Rackmount Charging Station (1.13.5) See release notes

Posted July 15, 2013

NOTES

  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.12.8:
    • UR4 UHF-R receiver 1.166
    • UR3 Plug-on Transmitter 1.0.0.9
    • UR5 Portable Diversity Receiver 1.0.0.13
    • ULXD4 ULXD Receiver 1.2.14
    • P10T PSM1000 Transmitter 1.3.4
    • Wireless Workbench 6 Beta version 6.8.0

AXT900 - Axient Rackmount Charging Station (1.14.6) See release notes

Posted January 24, 2014

NOTES

  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.14.6:
    • UR4 UHF-R receiver 1.171
    • UR3 Plug-on Transmitter 1.0.0.16
    • UR5 Portable Diversity Receiver 1.0.0.13
    • ULXD4 ULXD Receiver 1.4.14
    • P10T PSM1000 Transmitter 1.3.9
    • Wireless Workbench 6.9.0

AXT900 - Axient Rackmount Charging Station (1.15.3) See release notes

Posted June 25, 2014

NOTES

  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.15.3:
    • UR4 UHF-R receiver 1.171
    • UR3 Plug-on Transmitter 1.0.0.16
    • UR5 Portable Diversity Receiver 1.0.0.13
    • ULXD4x ULX-D Receivers 1.5.6
    • QLXD4 QLX-D Receiver 1.0.13
    • P10T PSM1000 Transmitter 1.3.9
    • Wireless Workbench 6.10.0

AXT900 - Axient Rackmount Charging Station (1.16.11) See release notes

Posted November 17, 2015

IMPROVEMENTS

  • Graphic User Interface (GUI) added for viewing and entering gateway and IP address to achieve cross-subnet monitoring and control.

NOTES

  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.16.11:
    • UR4 UHF-R receiver 1.171
    • UR3 Plug-on Transmitter 1.0.0.16
    • UR5 Portable Diversity Receiver 1.0.0.13
    • ULXD4X ULX-D Receivers 1.6.11
    • QLXD4 QLX-D Receiver 1.1.15
    • P10T PSM1000 Transmitter 1.3.9
    • Wireless Workbench 6.11.3

Product Support

Get Live Support

We ♥ Subscribers

Sign up for the chance to win 1 of 5 exclusive swag packages awarded monthly, including a tee-shirt you can’t get anywhere else. You’ll also get our monthly Shure Notes® digest with how-to tips, product info, artist news, event invitations, and special promotions, plus occasional timely offers and announcements.