PSM 200

Downloads
User Guide (English)
Related Links
FAQ's for PSM 200
Add To Favorites
Remove From Favorites

P2RHybrid Bodypack Receiver

Shure

PSM 200 System Components 

The P2R Hybrid Bodypack Receiver is the world's first bodypack receiver to function as a wired receiver, a wireless receiver, or both at the same time. This and other unique features, along with excellent sound quality, make the P2R an exceptional value.  

FCC Consumer Alert (U.S.)

Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change.

For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC’s wireless microphone website at www.fcc.gov/cgb/wirelessmicrophones.

  • Key Features:  Operates as a wired or wireless bodypack, or both simultaneously
  • Other Features:  Frequency locator, Built-in headphone limiter, Integrated cable management, High-impact plastic chassis, 1/4" Line input jack with high/low gain switch
  • Operating Controls:  Volume knob, Frequency select
  • LED Indicators:  Power, RF reception, Frequency, Limiter, Low battery
RF Sensitivity
-109 dBm typical
Squelch Threshold
-102 dBm typical
Antenna
Attached Whip
Audio Input Connector
Connector Type: 1/4-inch Mono
Impedance: 1 megohm
Maximum Input Level: LO = +0 dBu; HI = ­10 dBu
Frequency Response: 30 Hz to 20 kHz (+/-3 dB); earphone dependent
Power Requirements
9 V alkaline battery, Duracell® type MN1604 recommended
Battery Life
Volume Dependent
Wired (RF Off): 6 hours
Wireless (RF On): 4 hours
Audio Output Connector
1/8 inch (3.5 mm)
Minimum Load Impedance
8 ohms
Net Weight
100 g (3.52 oz.), less battery
Overall Dimensions
122 mm x 73 mm x 32 mm (4.809 in. x 2.875 in. x 1.251 in.)
shName Availability

PS9US Battery Eliminator

Battery Eliminator replaces one standard 9V battery, allowing connection to a Shure PS41 AC Adaptor (included) via a threaded DC connector. Use with Shure models P2R, P4R, P4HW, T1, T1G, LX1, UT1, ULX1, MX1BP and VP3.

 Where To Buy
User Guides Language File Size
PSM200 User Guide English 2189 (kb)
PSM200 User Guide French 2161 (kb)
PSM200 User Guide German 2139 (kb)
PSM200 User Guide Portuguese 2114 (kb)
PSM200 User Guide Spanish 2143 (kb)