PSM 200

Downloads
User Guide (English)
Related Links
FAQ's for PSM 200
Add To Favorites
Remove From Favorites

P2TWireless TransMixer

Shure

PSM 200 System Component 

The P2T TransMixer is breakthrough design for personal monitoring. It allows the user to connect two line-level or miclevel inputs directly into the transmitter. The two signals can then be mixed independently. You can connect microphones or instruments directly to the inputs or use line outputs from a mixing console. In short, no matter what the output device, you can probably plug it into the TransMixer.  For use with PSM 200 monitors. 

FCC Consumer Alert (U.S.)

Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change.

For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC’s wireless microphone website at www.fcc.gov/cgb/wirelessmicrophones.

  • Key Features:  Built-in audio limiter, Front mounted antenna, Two mic/line input channels for mix control, 1/2 Rack space 
  • Operating Controls:  Input level control, Frequency select 
  • LED Indicators:  Tri-color input level, Frequency 
  • Inputs:  Two Mic/line, XLR-1/4 in. combo input channels 
  • Outputs:  Two XLR split outputs
RF Output Power
30 mW (+15 dBm) typical conducted (country dependent)
Modulation Limiter
Internal peak limiter (>10:1 hard knee compression)
Antenna
1/4 Wavelength, semi-rigid, PCB Mount
P2T Audio Input
Connector Type: XLR-1/4-inch combo
Configuration: electronically balanced
Actual Impedance: 1 kilohm
Nominal Input Level: ­25 dBu @ 1/2 volume (12 o'clock)
Maximum Input Level: ­5 dBu @ 1/2 volume (12 o'clock)
Pin Assignments:
XLR: 2=hot; 3=cold, 1=ground
1/4: Tip = hot, Ring = cold, Sleeve=ground
Phantom Power Protection? Yes: Up to 52 Vdc
Current
170 mA maximum
Dimensions
220 mm x 140 mm x 40 mm (8.6 in. x 5.6 in. x 1.7 in.)
Net Weight
370 g (13 oz.)
P2T Audio Outputs
Passive connection parallel with input:
Connector Type: XLR
Configuration: electronically balanced
Pin Assignments: 2 = hot ; 3 = cold, 1 = ground
Phantom Power Protection? Yes: Up to 52 Vdc
Power Requirements
Operating voltage 12-18 Vdc
Supplied with one of the following external power supplies:
Model PS20: 120 VAC, 60 Hz input.
Model PS20E, Model PS20UK: 230 VAC, 50/60 Hz input.
User Guides Language File Size
PSM200 User Guide English 2189 (kb)
PSM200 User Guide French 2161 (kb)
PSM200 User Guide German 2139 (kb)
PSM200 User Guide Portuguese 2114 (kb)
PSM200 User Guide Spanish 2143 (kb)