Microflex Microphones

Professional microphones for a wide variety of installed applications.

Cardioid Polar Pattern
Picks up the most sound in front of the microphone and some from the sides. Less susceptible to feedback in high volume environments.
Tailored Frequency Response
Smooth, extended response. Tuned to accentuate specific types of instruments, or voices.

MX412 & MX418 Microflex Standard Gooseneck Microphones

Shure
Condenser
Lightweight, sensitive diaphragm. Precisely and smoothly captures sound nuances. Powered by battery or phantom power supply.
Recommended Uses
Conference/Installed
Paging

Microflex® Standard Gooseneck microphones bring a whole new meaning to the word flexible with their fully adjustable gooseneck. Designed for easy replacement and available in cardioid, supercardioid and omnidirectional polar patterns, the interchangeable cartridges offer wide frequency response and accurate sound reproduction for a wide variety of applications, such as houses of worship, courtrooms and conference centers. Plus, the condenser cartridges fit every model in the Microflex product line for enhanced convenience and consistent sound. 

Available Options
MX412 12" (304.8 mm) Goosenecks. See options below.
MX418 18" (457.2 mm) Goosenecks. See options below.
MX412S Includes Mute Switch and LED Indicator. See options below.
MX418S Includes Mute Switch and LED Indicator. See options below.
MX412SE Includes 10' (3 m) Side- (or Bottom-) Exit Cable. See options below.
MX418SE Includes 10' (3 m) Side- (or Bottom-) Exit Cable. See options below.
MX412D Desktop Goosenecks include Base & Cable. See options below.  (shown)
MX418D Desktop Goosenecks include Base & Cable. See options below.

Available with a variety of heights and mounting styles to choose from. The S/C, S/S, and S/N models include a silent mute switch with LED indicator, a Shure Microflex exclusive. 

C = Cardioid, S = Supercardioid, N = No Cartridge 

Gooseneck Microphones

MX412/C MX412/S MC412/N

12"   Attached XLR Preamp, Shock & Flange Mount, Snap-Fit Foam Windscreen

MX418/C MX418/S MX418/C

18"   Attached XLR Preamp, Shock & Flange Mount, Snap-Fit Foam Windscreen

MX412S/C MX412S/S MX412S/N 

12"   Attached XLR Preamp, Shock & Flange Mount, Snap-Fit Foam Windscreen, Mute Switch, LED Indicator

MX418S/C MX418S/S MX418S/N

18"   Attached XLR Preamp, Shock & Flange Mount, Snap-Fit Foam Windscreen, Mute Switch, LED Indicator

MX412SE/C MX412SE/S MX412SE/N

12"   In-Line Preamp, Shock & Flange Mount, 10' Side- (or Bottom-) Exit Cable, Snap-Fit Foam Windscreen

MX418SE/C MX418SE/S MX418SE/N

18"   In-Line Preamp, Shock & Flange Mount, 10' Side- (or Bottom-) Exit Cable, Snap-Fit Foam Windscreen
Desktop Gooseneck Microphones

MX412D/C MX412D/S MX412D/N

12"   Desktop Base with 10' Cable, Logic Functions, Programmable Switch, LED Indicator, Snap-Fit Foam Windscreen

MX418D/C MX418D/S MX418D/D

18"   Desktop Base with 10' Cable, Logic Functions, Programmable Switch, LED Indicator, Snap-Fit Foam Windscreen
 

 

  • Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
  • Interchangeable cartridges provide the right polar pattern for every application
  • Balanced, transformerless output for increased immunity to electromagnetic hum and RF interference over long cable runs
  • Shock mount provides over 20 dB isolation from surface vibration noise
  • Locking flange mount for permanently securing microphone to lecterns, pulpits, or conference tables
  • Snap-fit foam windscreen
  • Programmable on/off switch and LED on/off indicator (MX412D/MX418D)
  • New brighter LED improves visibility under strong ambient lighting (MX412D/MX418D)
  • Logic input and output terminals for remote control or use with automatic microphone mixers (MX412D/MX418D)
  • Supplied shock mount for more than 20 dB isolation from surface transmitted noise (MX412SE/MX418SE)
  • Supplied threaded flange mount for permanently securing the microphone to a lectern, pulpit, or conference table (MX412SE/MX418SE)

 

MX412, MX412S, MX418, MX418S Spec Sheet
MX412SE, MX418SE Spec Sheet
MX412D, MX418D Spec Sheet


Frequency Response
50 to 17,000 Hz
Response Curve Image Small Microflex View Larger
Output Impedance
180 ohms actual (EIA rated at 150 ohms)
Sensitivity (At 1,000 Hz, open circuit voltage*)
Cardioid: -35.0 dBV/Pa (17.8 mV)
Supercardioid: -33.5 dBV/Pa (21.1 mV)
Omnidirectional: -27.5 dBV/Pa (42.2 mV)
All values -12 dB at 0 gain
*1 Pascal = 94 dB SPL
Maximum SPL (1 kHz at 1% THD, 1 kilohm load)
Cardioid: 124.2 dB
Supercardioid: 122.7 dB
Omnidirectional: 116.7 dB
All values +6 dB at 0 gain
Equivalent Output Noise (A-weighted)
Cardioid: 28.0 dB SPL
Supercardioid: 26.5 dB SPL
Omnidirectional: 20.5 dB SPL
Signal to Noise Ratio (referenced at 94 dB SPL)
Cardioid: 66.0 dB
Supercardioid: 67.5 dB
Omnidirectional: 73.5 dB
Dynamic Range at 1 kilohm load
96.2 dB
100 dB at 0 gain
Common Mode Rejection
45.0 dB minimum
Preamplifier Output Clipping Level (1% THD)
-6.0 dBV (0.5 V)
-12 dBV at 0 gain
Polarity
Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output connector
Power Requirements
11 to 52 Vdc phantom, 2.0 mA
Environmental Requirements
Operating Temperature Range: -18 to 57 degrees C (0 to 135 degrees F)
Relative Humidity: 0 to 95%
Dimensions
See User Guide
Name Availability

RK183PKW In-Line Preamplifier

In-Line Preamplifier for MX180 Series, MX202B, MX412, MX412SE, and MX391 Microflex Microphones.

Where To Buy

A400SM, A400XLR, A400SMXLR and A99SMA Shock Mounts

The A400SM, A400XLR, A400SMXLR and A99SMA are accessories that allow permanent installation of a quick-release shock mount for use with a wide variety of gooseneck microphones.

Where To Buy

RK412WS Snap-fit Microphone Windscreens

Reduces unwanted breath and wind noise. Snap-fit windscreen securely fastens to Shure MX412 and MX418 microphones (contains 4).

Available Online

A99SMA Retrofit Adapter for SM99 Microphone

Adapter to Retrofit SM99 Microphone Series with Microflex Mounting Accessories.

Where To Buy

R184B and R184W Supercardioid Cartridges

Supercardioid cartridge for WL183, WL184, WL185 and all Microflex MX183, MX202, MX391, MX392, MX393, MX405, MX410, MX412, MX418 Microphones. White or Black.

Where To Buy

R185B and R185W Cardioid Cartridges

Cardioid cartridge for all Microflex MX185, MX202, MX391, MX392, MX393, MX405, MX410, MX412, MX418 and WL185 microphones. White or Black.

Where To Buy

A412B Desktop Base

Shure A412B microphone base allows gooseneck mics to be quickly mounted when permanent installation is impractical. Angled XLR input connector maintains a low profile. Ample room for custom circuitry. Includes cable.

Where To Buy

A99WS Microphone Windscreen

Reduces unwanted breath and wind noise. For use with Shure Microflex Gooseneck Microphones. Available in black.

Available Online

R183B R183W Omnidirectional Cartridge

Omnidirectional cartridge for all Microflex MX183, MX202, MX391, MX392, MX393, MX405, MX410, MX412, MX418 and WL183 microphones. White or Black

Where To Buy

A412MWS Locking Metal Windscreen

Reduces unwanted breath and wind noise. For use with Shure Microflex gooseneck microphones. Available in black.

Available Online
User Guides Language File Size
MX412SE MX418SE User Guide English, French, German, Italian, Spanish 590 (kb)
MX412 418 412S 418S User Guide English, French, German, Italian, Spanish 465 (kb)
MX412D MX418D User Guide English, French, German, Italian, Spanish 913 (kb)