- Cardioid Polar Pattern
- Picks up the most sound in front of the microphone and some from the sides. Less susceptible to feedback in high volume environments.
- Bidirectional Polar Pattern
- Picks up sound equally from the front and back of the microphone.
- OmniDirectional Polar Pattern
- Equally sensitive to sound from all directions, but cannot be "aimed" to isolate one area.
- Tailored Frequency Response
- Smooth, extended response. Tuned to accentuate specific types of instruments, or voices.
MX395Microflex Low Profile Boundary Microphone
Shure
- Condenser
- Lightweight, sensitive diaphragm. Precisely and smoothly captures sound nuances. Powered by battery or phantom power supply.
- Recommended Uses
- Conference/Installed
The Microflex® Low Profile Boundary microphone is an ideal table microphone when minimal presence is of high priority. Perfect for meeting rooms, these microphones deliver exceptional sound pickup while barely being noticed. Choose from a selection of colors and pickup patterns for customized table installations.
Cartridge polar pattern indicated by model number suffix
(C = Cardioid, BI = Bidirectional, O= Omnidirectional):
- Only 1.25 inch (3.8 cm) in diameter
- Cardioid, omni and bidirectional polar patterns
- Wide dynamic range and smooth frequency response
- Available in black, white and aluminum
- Bi-color status indicator available with -LED models
- Logic input for remote LED control
- CommShield® Technology
- Specifications Sheet (PDF)
- Type
- Condenser (electret bias)
- Frequency Response
- 50 to 17000 Hz
- Polar Pattern
- MX395/O: Omnidirectional
- MX395/C: Cardioid
- MX395/BI: Bidirectional
- Output Impedance
- EIA Rated at 150 Ohms (170 Ohms actual)
- Output Configuration
- Active balanced
- Sensitivity (at 1 kHz , open circuit voltage)
- Cardioid: -35 dBV/Pa (18 mV)
- Omnidirectional: -28 dBV/Pa (42 mV)
- Bidirectional: -37 dBV/Pa (14 mV)
- 1 Pascal=94 dB SPL
- Maximum SPL (1 kHz at 1% THD, 1 kilohms load)
- Cardioid: 121 dB
- Omnidirectional: 114 dB
- Bidirectional: 123 dB
- Equivalent output Noise (A-weighted)
- Cardioid: 28 dB SPL
- Omnidirectional: 21 dB SPL
- Bidirectional: 29 dB SPL
- Signal-to-Noise Ratio (referenced at 94 dB SPL at 1 kHz)
- Cardioid: 66 dB
- Omnidirectional: 73 dB
- Bidirectional: 65 dB
- Dynamic Range (1 kilohm load at 1 kHz)
- Cardioid: 93 dB
- Omnidirectional: 93 dB
- Bidirectional: 94 dB
- Common Mode Rejection (10 Hz - 100 kHz)
- 45 dB minimum
- Preamplifier output Clipping level (1% THD)
- -8 dBV (0.4 V)
- Polarity
- 3-Pin XLR: Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector.
- 5-Pin XLR: Positive sound pressure on diaphragm produces positive voltage on pin 4 relative to pin 2 of output XLR connector.
- Weight
- Net: 0.136 kg (0.30 lbs.)
- Packaged: 0.374 kg (0.825 lbs.)
- Logic Connections
- LED IN: Active low (≤1.0V), TTL compatible. Absolute maximum voltage: -0.7V to 50V.
- Environmental Conditions
- Operating Temperature: -18 to 57 deg. C (0 to 135 deg. F)
- Storage Temperature: -29 to 74 deg. C (-20 to 165 deg. F)
- Relative Humidity: 0 to 95%
- Power Requirements
- MX395: 11 - 52 Vdc phantom, 2.0 mA
- MX395-LED: 48 - 52 Vdc phantom, 8.0 mA
| User Guides | Language | File Size |
|---|---|---|
| MX395 User Guide | English | 2294 (kb) |
