Downloads: Microflex Microphones Product Brochure (PDF); MX183 MX184 MX185 Specification Sheet (PDF)
Related Links: FAQ's for MX183, MX184, MX185; CommShield® Technology White Paper; RF and GSM Resistance

: Condenser Microphone Type
Lightweight, sensitive diaphragm. Precisely and smoothly captures sound nuances. Powered by battery or phantom power supply.
: Cardioid Polar Pattern
Picks up the most sound in front of the microphone and some from the sides. Less susceptible to feedback in high volume environments.
: OmniDirectional Polar Pattern
Equally sensitive to sound from all directions, but cannot be "aimed" to isolate one area.
: SuperCardioid Polar Pattern
Screens unwanted sound sources. Ideal for individual instruments in a multi-microphone setting, or single sources in noisy environments.
: Tailored Frequency Response
Smooth, extended response. Tuned to accentuate specific types of instruments or voices.

MX183, MX184 & MX185 Lavalier Microphones

Form Factors

Lavalier

Model Lines

Microflex

Available Options

MX183	Omnidirectional, Includes Belt-Clip Preamp, Rotatable Tie Clip, Dual Tie Clip, Snap-Fit Windscreen
MX184	Supercardioid, Includes Belt-Clip Preamp, Rotatable Tie Clip, Dual Tie Clip, Snap-Fit Windscreen
MX185	Cardioid, Includes Belt-Clip Preamp, Rotatable Tie Clip, Dual Tie Clip, Snap-Fit Windscreen
MX180	Housing only, No Cartridge.

Microflex® Lavalier microphones bring a new level of sophistication to personal voice reproduction. Like all Microflex family microphones, the Lavaliers use Shure's interchangeable condenser cartridges, available in cardioid, supercardioid or omnidirectional polar patterns. That means you can be sure there is a Microflex Lavalier that's right for your application. Compatible with all Shure wireless bodypack transmitters, their high sensitivity and wide frequency response guarantee great sound.

- Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
- Interchangeable cartridges that provide an optimal choice for each application
- Rotatable tie-clip that pivots in 90 degree increments for placement flexibility
- Supplied snap-fit foam windscreen that controls breath noise and stays on securely
- Balanced, transformerless output for increased immunity to noise over long cable runs
- Supplied dual tie clip holds two microphones for dual miking applications
Type

Condenser (electret bias)

Frequency Response

50 to 17,000 Hz

Polar Pattern

MX183: Omnidirectional MX184: Supercardioid MX185: Cardioid

lmpedance

EIA rated at 150 ohms (180 ohms actual)

Phantom power required?

11 to 52 Vdc phantom, 2.0 mA

	Name	Availability
	C122 The C122 is a 4 foot (1.3 m) Cable, 4-Pin Mini Connector (TA4F) to lavalier housing. For Shure microphones MX183, MX184, MX185, WL183, WL184, WL185.	Where To Buy
	R183 Omnidirectional cartridge for all Microflex® MX183, MX202, MX391, MX392, MX393, MX405, MX410, MX415, MX412, MX418, and WL183 microphones. White or Black.	Where To Buy
	R184 Supercardioid cartridge for WL183, WL184, WL185 and all Microflex® MX183, MX202, MX391, MX392, MX393, MX405, MX410, MX415, MX412, and MX418 Microphones. White or Black.	Where To Buy
	R185 Cardioid cartridge for all Microflex® MX185, MX202, MX391, MX392, MX393, MX405, MX410, MX415, MX412, MX418, and WL185 microphones. White or Black.	Where To Buy
	RK183T1 Single Mount Tie Clip for MX183, MX184, MX185, WL183, WL184 and WL185 (contains two).	Where To Buy
	RK183T2 Dual Mount Tie-Clip for Shure MX183, MX184, MX185, WL183, WL184 and WL185 microphones (contains one).	Where To Buy
	RK183WS Works with Beta 98A, Beta 98/S, Beta 98D/S, Beta 98H/C, MX183, MX184, MX185, MX202, WH30, WL183, WL184, WL185. Contains 4.	Where To Buy
	RK261BWS Reduces unwanted breath and wind noise. For use with Shure MX183, MX184, MX185, WL183, WL184, and WL185 microphones (contains four). Available in black.	Where To Buy