Downloads: Classic Microphones Product Brochure (PDF)

: Dynamic Microphone Type
Simple, rugged diaphragm/coil. handles extreme volume levels without distortion.
: Cardioid Polar Pattern
Picks up the most sound in front of the microphone and some from the sides. Less susceptible to feedback in high volume environments.
: Tailored Frequency Response
Smooth, extended response. Tuned to accentuate specific types of instruments or voices.

565SD Classic Unisphere Vocal Microphone

Applications

Form Factors

Handheld

Model Lines

Classic

Available Options

565SD-LC	Cable Not Included

The predecessor to the SM58®, The 565SD Classic Unisphere® Vocal Microphone is a dual-impedance, unidirectional dynamic microphone famous for its spot on the Woodstock stage.

It features highly effective wind and "pop" filter for vocals and a durable, wire-mesh front grille. Shipped connected for low-impedance operation, the 565SD provides excellent vocal or speech reproduction onstage, and can also be used with public address systems.

- Versatile, high-quality microphone with sound characteristics similar to the SM58®
- Selectable dual-impedance operation
- Silent magnetic reed on/off switch with lock-on option
Type

Dynamic

Frequency Response

50 to 15,000 Hz

Polar Pattern

Cardioid (unidirectional)--uniform with frequency, symmetrical about axis

lmpedance

Dual. Microphone rating impedance is 150 ohms (250 ohms actual) for connection to microphone inputs rated at 19 to 300 ohms and "High" for connection to high-impedance microphone inputs. Wired for low impedance as supplied.

Output Level

LOW @ 1,000 Hz: Open Circuit Voltage* -58.0 dB (1.3 mV); HIGH @ 1,000 Hz: Open Circuit Voltage* -35.0 dB (17.6 mV) *0 dB = 1 volt per Pascal (1 Pa = 94 dB SPL)

	Name	Availability
	A25D Break resistant microphone clip that securely mounts the SM58, SM57, SM87A, Beta 87A, Beta 87C and all other microphones with 3/4-inch and larger handles to a standard microphone stand.	Where To Buy
	A55HM Shock Stopper Isolation Mount/Swivel Adapter, Half Mount, for SM57, SM58, Beta 57A, Beta 58A, Beta 87A, Beta 87C or any Shure tapered handle mic.	Where To Buy
	A55M Isolation mount and swivel adapter securely attaches Shure models SM57, SM58, SM86, Beta57A, Beta58A, Beta87A, and Beta87C to standard microphone stands.	Where To Buy
	A58WS Reduces unwanted breath and wind noise. For use with all larger Shure "ball-type" microphones including the SM58, Beta58A, SM48, and the 565SD. Available in 6 colours; black, blue, gray, green, red, and yellow.	Where To Buy
	R65 Replacement cartridge for the Shure 565 Series, PE56 Series, and the 566, PE566 and PE50SP UNISPHERE1 Dynamic Microphones.	Where To Buy
	RS65 Grille for 565 Series Microphones.	Where To Buy
	S37A Desk stand, gray finish, for use with various Shure swivel adapters and shock mounts.	Where To Buy