Name Availability
X2u

Easily connect any XLR microphone to your computer for digital recording with headphone monitoring.

A120S

In-line, balanced, locking or momentary switch for a microphone. Note: Requires soldering.

A15AS

Switchable in-line attenuator reduces the level of any balanced microphone or line-level signal, preventing input overloads.

A15BT

Matches, bridges, or isolates balanced and unbalanced devices of different impedances and levels. Male XLR to female XLR.

A15HP

Balanced XLR in-line filter that reduces low frequencies below 100 Hz.

A15LA

Reduces the level of an audio signal by 50dB, which allows a line level output to be connected to a microphone input.

A15PRS

Reverses the phase (polarity) of a balanced audio signal.

A15RF

Reduces interference from AM radio stations that may bleed into microphone lines when using long cables.

A15TG

Battery-powered 700 Hz signal source used to troubleshoot audio systems by checking microphone lines for correct patching and detecting unusual noise that is present.

A300PC

A300PC

Polishing cloth for KSM Microphones.

A85F

The Shure A85F is a low-to-high impedance microphone-matching transformer used to connect a balanced low-impedance microphone output to an unbalanced high impedance input on a mixer/recorder.

A95U

Allows high-impedance a high impedance microphone to be connected to balanced low-impedance inputs.

A95UF

Allows a balanced low-impedance microphone to be connected to an unbalanced high-impedance input.

A96F

Connects microphones with an XLR-type connector to the 3.5 mm inputs found on camcorders and other recording devices.

RK100PK

RK100PK

In-Line Preamplifier for Microflex Microphones. Boosts resistance to Radio Frequency Interference (RFI).