The Shure A120S In-Line On/Off Switch is an in-line, balanced, locking or momentary switch for a microphone. The A120S can be configured in several ways to meet different user requirements. Typical use cases include adding Latch On/Off, Push-To-Talk, or Push-To-Mute (cough button) to a microphone. The A120S is contoured to fit comfortably in the hand, and an attached belt clip rotates to four positions to allow convenient mounting. The A120S can be wired Normally-Open or Normally-Closed, and can be used with a balanced mono audio signal or an unbalanced stereo audio signal.
(Note: A120S is supplied unterminated; the installer must solder appropriate wiring to provide the function desired.) Its pushbutton combines with a rotary knob to provide either spring-return momentary or locking action. The unit is supplied with a crimp-on strain relief for 6.4mm (0.25-in.) diameter cable and with a flex relief for either large or small diameter cables.
How do I wire an A120S
HOW THE A120S WORKS: When the button is UP, the top and middle terminals are connected. ...
Fabricate the UA101 from the A120S
The UA101 is factory wired for audio Push-To-Mute as follows: Shorting the Ring to ...
Mic Level and Line Level -- What do they mean?
Some mixers have switches on the rear panel for setting each input jack or output jack for mic...
Difference between a dynamic and condenser microphone
Dynamic and condenser describe the operating principal used in a microphone. Operating pr...
Which microphone should I use on ... ? (Selection Guides)
The following are current Shure microphones as of May 2017. Also listen to our online Mic ...
Vintage Shure Catalogs (1933-1985)
Year Type Size Model numbers 1933 Cat...
Get Live Support
Instructional articles, guides, demos and more! Our experts offer industry-proven tips and tricks to help you get the most from your gear.
Service & Repair
Detailed policy information regarding customer service numbers, service modifications, and replacement parts.