WB98H/C Instrument Microphone

The Shure WB98H/C (the wireless version of the Beta 98H/C) is a premium cardioid condenser instrumental microphone that clamps onto the bell of wind instruments or onto the rim of percussion instruments. The integrated gooseneck and ratcheting swivel joint allows the microphone to be easily positioned and secured in place, and an isolation shock-mount reduces the transmission of instrument 'key noise' and other mechanical noise. A gooseneck angle brace is included to provide better retention of the microphone placement during more active performances.

WB98H/C with 10 ft. cable terminated to 4-Pin Mini-Connector.

This wireless version of the Beta98H/C is a versatile solution for high-volume wind, brass or percussion. Gooseneck with clip-on clamp for secure fit and positioning.  Cardioid, Condenser.

• The WB98H/C features transformerless preamplifier circuitry, which improves linearity across the full frequency range.
• The pickup pattern of the Beta 98H/C provides high gain-before-feedback and excellent rejection of unwanted noise.
• Its high maximum sound pressure level (SPL) enables it to handle the extreme demands of brass, woodwind and percussion instruments.

• Tailored frequency response for studio quality performance
• Wide dynamic range for use in high SPL environments
• Uniform supercardioid pattern for high gain before feedback and superior rejection of off-axis sound
• Optional A98D drum mount is unobtrusive and versatile--allows precise positioning of the microphone while holding it firmly in place
• Compact design reduces stage clutter
• Detachable cable for easy storage
• Interchangeable microphone cartridges with different polar patterns are available
• Legendary Shure quality, ruggedness, and reliability

Type

Condenser (electret bias)

 

Frequency Response

20 to 20,000 Hz

  view larger

(measured at 304.8 mm [1 ft] from a spherical sound source, free field conditions)

 

Polar Pattern

Supercardioid (as supplied), uniform with frequency, symmetrical about axis. Cartridge for cardioid polar pattern also available.

 

Output Level (at 1,000 Hz)

Open Circuit Voltage: -59 dBV/Pa* (1 mV) typical

*1 Pa = 94 dB SPL

 

Maximum SPL

(20 Hz to 20 kHz, less than 1% THD)

2.5 kilohm load: 160 dB

1 kilohm load: 156 dB

 

Preamplifier Output Clipping Level

(20 Hz to 20 kHz, less than 1% THD)

2.5 kilohm load: + 6 dBV (2.0 V)

1 kilohm load: + 2 dBV (1.26 V)

 

Dynamic Range

(at 20 Hz to 20 kHz, less than 1% THD, 2.5 kilohm load)

125 dB (max SPL minus A-weighted noise)

 

Output Noise

35 dB SPL, A-weighted

 

Signal-to-Noise Ratio

59 dB re 94 dB SPL

 

Output Impedance

Rated at 150 ohms (actual)

Recommended minimum load impedance: 1 kilohm

 

Hum Pickup

-7.5 dB equivalent SPL in 1 mOe field (60Hz)

 

Polarity

Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3

 

Phantom Power

48 Vdc +/- 4 Vdc(IEC-268-15/DIN 45 596), positive pins 2 and 3.

 

Cable

BETA 98/S: 7.6 m (25 ft) light-weight, two-conductor shielded, TA4F to TA3F mini connectors.

BETA 98D/S: 4.6 m (15 ft) heavy-duty, two-conductor shielded, TA4F to TA3F mini connectors.

 

Case

Microphone: Matte black enamel brass case and stainless steel inner grille

Preamplifier: Matte black enamel finished steel

 

Dimensions

Microphone: 11.7 mm X 35.6 mm (0.46 in. X 1.40 in.)

Preamplifier: 20 mm X 99 mm (0.79 in. X 3.89 in.)

 

Net Weight

Microphone: 12 g (0.4 oz) less cable

Preamplifier: 96 g (3.4 oz)