- Pro Audio Home >
- >
- >
WH30XLR Wired Condenser Headset Microphone
The Shure Model WH30 is a light yet rugged headset microphone. Designed for vocalists and instrument-playing vocalists, the WH30 utilizes a high quality electret-condenser cartridge suitable for all applications where mobility, comfort, low microphone-visibility, and high sound quality are required. Because of its cardioid (unidirectional) pickup pattern, the WH30 provides isolation from extraneous sound sources and high gain-before-feedback.
The wireframe and gooseneck adjust to any head size and shape. An integrated elastic headband comfortably pads and secures the headset. The WH30 is supplied with two snap-on windscreens, clothing clip, storage bag and cable-management device.
The WH30 is a perfect fit for those who desire total freedom of movement and need the high-quality audio of a condenser microphone.
-
WH30XLR (Wired) - Supplied with 1.5m (5 ft.) hi-flex cable and high quality mic preamplifier (RPM420) with three-pin XLR connector. The RPM420 preamp requires phantom power from any 11 - 52 V source.
-
Wireless Option: WH30TQG
- Tailored frequency response enhances vocal range
- Flexible gooseneck for optimum microphone placement
- Isolation shock mount reduces vibration noise
- Low-profile, lightweight design
- Cardioid polar pattern provides maximum gain before feedback
- High sound pressure level capability
- Secure snap-on windscreen reduces "p" pops
- WH30TQG (wireless) and WH30XLR (wired)
| WH30TQG | WH30XLR | |
| Type | Condenser, electret bias | Condenser, electret bias with integrated preamplifier |
| Frequency Response | 40 to 20,000 Hz | |
 view larger |
||
| Polar Pattern | Unidirectional (cardioid) | |
| Output Impedance (at 1kHz) |
2400 ohms | Rated 150 ohms (actual) (Tolerates loads as low as 150 ohms with reduced clipping level) |
| Output Level (at 1 kHz; 0 dB = 1 V/Pascal) |
-55.5 dB (1.7 mV) | -54.5 dB (1.9 mV) |
| Signal to noise ratio (ref. A-weighted noise) |
63.0 dB at 94 dB SPL (IEC 651) | |
| Output Clipping Level (at 1000 Hz) |
-22 dBV (0.08 V) | 2.5K ohm Load: -8 dBV (0.4V) 1 K ohm Load: -8 dBV (0.4V) |
| Maximum SPL | 130 dB | 2.5K ohm Load: 142 dB 1 K ohm Load: 142 dB |
| Dynamic Range (max. SPL to A-weighted noise level) |
99 dB | 111 dB |
| Output Noise (equivalent SPL) |
31 dB (typical, A-weighted) | |
| Recommended Operating Voltage |
5 VDC (pin 2 to pins 3 and 4) | 11-52 VDC Phantom power |
| Polarity | Positive sound pressure on diaphragm produces positive voltage on pins 3 and 4 relative to pin 1 (ground) on the mini TA4F connector. | Positive sound pressure on the diaphragm produces positive voltage on pin 2 relative to pin 3 of preamplifier output connector. |
| Environmental Conditions | Operating Temperature: -7 to 49 degrees C (20 to 120 degrees F) Storage Temperature -29 to 74 degrees C (-20. to 165 degrees F) Humidity: 0 to 95 % (operating or storage) |
|
| Cable | 1.5 m (5 ft.) two-conductor, shielded | |
| Cable Connector | mini TA4F | XLR |
| Net Weight | Headset: 65 g (2.3 oz) | Headset and cord: 60 g (2.1 oz) Preamplifier: 99 g (3.5 oz) |
R183B R183W Omnidirectional Cartridge
Omnidirectional cartridge for all Microflex MX183, MX202, MX391, MX392, MX393, MX405, MX410, MX412, MX418 and WL183 microphones. White or Black
R184B and R184W Supercardioid Cartridges
Supercardioid cartridge for WL183, WL184, WL185 and all Microflex MX183, MX202, MX391, MX392, MX393, MX405, MX410, MX412, MX418 Microphones. White or Black.
R185B and R185W Cardioid Cartridges
Cardioid cartridge for all Microflex MX185, MX202, MX391, MX392, MX393, MX405, MX410, MX412, MX418 and WL185 microphones. White or Black.
RK183WS Snap-Fit Foam Windscreen
Black snap-fit foam windscreens reduce unwanted breath and wind noise and securely fasten to Shure Beta 98, MX183, MX184, MX185, MX202, WH30, WL183, WL184, WL185 microphones (contains four).
RK318WS Headset Microphone Windscreen and Clothing Clip
Includes 2 black windscreens and a clothing clip for use with Shure WH20, and WH30 headset microphones.
RK319 Replacement Croakies Headset Band
Replacement Croakies headset band for Shure WH20 and WH30 headsets.