SM86 Vocal Microphone

The Shure SM86 is a unidirectional (cardioid) condenser vocal microphone for professional use in live performance. An extremely rugged microphone,
the SM86 withstands the rigors of touring while delivering studio-quality sound. The tailored frequency response of the SM86 reproduces vocals with
clarity. A cardioid pickup pattern isolates the main sound source while minimizing unwanted background noise. The built-in three-point shock mount
minimizes handling noise, and a two-stage pop filter reduces wind and breath "pop" noise.

 

SM86-LC:  Cable not included.

 

A rugged condenser microphone that features a tailored frequency response for clear reproduction of vocals. Built-in three-point shock mount and two-stage pop filter. Cardioid, Condenser.
  • Condenser cartridge for studio quality sound
  • Tailored frequency response for a clear reproduction of vocals
  • Rugged construction withstands the rigors of touring sound
  • Cardioid polar pattern minimizes unwanted background noise
  • Excellent choice for stage monitors and personal monitors
  • Built-in three-point shock mount minimizes handling noise
  • Two-stage "pop" filter reduces wind and breath noise
 

Transducer Type

          Condenser (electret bias)

Frequency Response
50 to 18,000 Hz
 
Pro Audio SM86_LARGE Response Curve  view larger
 
Polar Pattern
Cardioid
 
Output Impedance
150 Ohms at 1 kHz
Recommended minimum load impedance: 600 Ohms
 
Sensitivity (at 1,000 Hz)
Open Circuit Voltage: -50 dBV/Pa (3.15 mV)
(1 Pa = 94 dB SPL)
 
Output Clipping Level
1000 Ohm Load at 1,000 Hz: +3 dBV (1.41 V)
 
Maximum SPL (at 1,000 Hz)
1000 ohm load (1% THD): 147 dB
 
Self-Noise
23 dB typical, A-weighted
 
Dynamic Range (1000 ohms)
124 dB (maximum SPL to A-weighted noise level)

Signal-to-Noise Ratio

          71 dB at 94 dB SPL (IEC 651)*
          *S/N ratio is difference between 94 dB SPL and equivalent SPL of self-noise A-weighted.

Polarity
Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of the output connector.
 
Power
Phantom Supply Requirement: 11 to 52 Vdc, positive at both pins 2 and 3
Current Drain: 5.2 mA
 
Connector
          Three-pin (XLR) professional audio
 
Case
Dark gray enamel-painted steel with matte-finished silver colored steel grille
 
Dimensions
See User Guide
 
Net Weight
Net: 278 grams (9.8 oz)
 
Environmental Conditions
Operating: -18 degrees to 60 degrees C (0 degrees to 135 degrees F) (relative humidity >90%)
Storage: -29 degrees to 74 degrees C (-20 degrees to 165 degrees F) (relative humidity >80%)

A25D Microphone Clip

Securely mounts the SM58, SM57, SM87A, Beta 87A and all other microphones with 3/4-inch and larger handles to a standard microphone stand.


A55HM Snap-in "Shock Stopper" Mount

Shock Stopper Isolation Mount/Swivel Adapter, Half Mount, for SM57, SM58, Beta 57A, Beta 58A, Beta 87A, Beta 87C or any Shure tapered handle mic.

A55M Shock Mount Microphone Clip

Isolation mount and swivel adapter securely attaches Shure models SM57, SM58, SM86, Beta57A, Beta58A, Beta87A, and Beta87C to standard microphone stands.


A85WS Microphone Windscreen

Reduces unwanted breath and wind noise. For use with Shure microphones such as the Beta 87A, Beta 87C, SM87A, and SM86 microphones. Available in black.


RPM226 Factory Original SM86 Replacement Grille

Factory original replacement grille for Shure SM86 wired microphones and handheld transmitters.



Release 38