- Pro Audio Home >
- >
- >
PG58 Vocal Microphone
A rugged microphone tuned to accentuate the clarity of lead and back-up vocals.
-
PG58-QTR includes a 15ft (4.57m) XLR to 1/4" Cable, Microphone Clip, 5/8" to 3/8" Thread Adapter, and a Storage Bag.
- PG58-XLR includes a 15ft (4.57m) XLR to XLR Cable, Microphone Clip, 5/8" to 3/8" Thread Adapter, and Storage Bag.
- Tailored frequency response is smooth and extended. Tuned specifically for vocal applications.
- Cardioid polar pattern picks up the most sound from in front of the microphone and some sound from the sides. Less susceptible to feedback in high volume settings.
- Dynamic cartridge has a simple, rugged coil. Handles extreme volume levels without distortion.
- Cartridge includes a neodymium magnet for high output level.
- Internal shock mount for reduced handling noise.
- Durable metal construction.
- On/off switch for onstage control.
- Hardened steel mesh ball grille that resists wear and abuse.
- Integral "pop" filter reduces explosive breath sounds and wind noise.
- Includes 15ft (4.57m) cable, break-resistant mic clip and storage bag.
- Replacement cartridge: RPM150.
- Microphone Type
- Dynamic (moving coil)
- Polar Pattern
- Cardioid (unidirectional)
- Frequency Response
- 60 to 15,000 Hz
-
- view larger
- Polarity
- Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of microphone output connector
- Output Impedance (at 1000 Hz)
- 300 ohms
- Sensitivity (at 1000 Hz)
- -53 dBV/Pa, (2.2 mV), 1 Pascal=94 dB SPL
- Electromagnetic Hum Sensitivity
- 26 dB equivalent SPL in a 1 millioersted field (60 Hz)
- Switch
- Built-in On/Off switch
- Connector
- Three-pin professional audio connector (male XLR type)
- Case
- Die cast metal handle, black matte finish; hardened silver colored, spherical steel mesh grille
- Environmental Conditions
- This microphone operates over a temperature range of -29 to 57 degrees Celsius (-20 to 135 degrees Fahrenheit), and at a relative humidity of 0 to 95%.
- Weight
- Net: 321 g (11.3 oz)
- Packaged: 908 g (2 lb)
A25D Break Resistant Mount
The A25D is a break resistant mount for the SM58, SM57, SM87A, Beta 87A and all other microphones with 3/4-inch and larger handles. Available in quantities of 10 as the A25DM.
A58WS Foam Windscreens for Ball Type Microphones
Windscreens for larger Shure "ball-type" microphones, such as the SM48, SM58, Beta 58A, or 565SD. Black, Blue, Gray, Green, Red and Yellow.