Shure - Microphones - MX405 and MX410 Microflex Miniature Gooseneck Microphones

MX405 and MX410 Microflex Miniature Gooseneck Microphones

Flexible in more ways than one, Microflex® Miniature Gooseneck microphones deliver unsurpassed style and performance for conference rooms and similar applications. Offering desktop or mounted bases, wired or wireless options, and even interchangeable cartridges, it’s easy to get the perfect fit for your conferencing installation. Fully compatible with SLX® wireless systems.

Click "view larger" to see additional MX405 and MX410 models.

Microflex Miniature Gooseneck microphones offer a smart, professional look and accurate sound reproduction for a variety of applications.

Available in 5 inch (127 mm) and 10 inch (254 mm) lengths
Cardioid and supercardioid polar patterns
Bi-color status indicator or single color light ring
Programmable mute switch (desktop models only)
Logic input/output for remote LED and mute control
Surface-mount and wired or wireless desktop base options
CommShield™ Technology for improved RF filtering

The polar pattern of the cartridges below are indicated by the model number suffix:

C = Cardioid, S = Supercardioid, N = No Cartridge

Miniature Gooseneck Models
MX405/C MX405/S	5 inch (127 mm), bi-color status indicator, includes surface mount preamp
MX405R/N	5 inch (127 mm), light ring, includes surface mount preamp
MX410/C MX410/S	10 inch (254 mm), bi-color status indicator, includes surface mount preamp
MX410R/N	10 inch (254 mm), light ring, includes surface mount preamp
MX405LP/C MX405LP/S	5 inch (127 mm), bi-color status indicator, less preamp
MX405RLP/N	5 inch (12.7 cm), light ring, less preamp
MX410LP/C MX410LP/S	10 inch (25.4 cm), bi-color status indicator, less preamp
MX410RLP/N	10 inch (25.4 cm), light ring, less preamp
Mounting Options
MX400DP	Desktop Base for MX405 and MX410 models
MX890	Wireless Desktop Base for MX405 and MX410 models
MX400SMP	Surface Mount Preamp for MX405 and MX410 models

Specification Sheet (MX405, MX410, English)

Type
Condenser (electret bias)

Frequency Response

view larger
50–17000 Hz

Polar Pattern
MX405/C, MX410/C: Cardioid
MX405/S, MX410/S: Supercardioid

Output Impedance
EIA Rated at 150 Ω (170 Ω actual)

Output Configuration
Active balanced

Sensitivity (at 1 kHz , open circuit voltage)
Cardioid: –35 dBV/Pa (18 mV)
Supercardioid: –34 dBV/Pa (21 mV)
1 Pascal=94 dB SPL

Maximum SPL (1 kHz at 1% THD, 1 kΩ load)
Cardioid: 121 dB
Supercardioid: 120 dB

Equivalent Output Noise (A-weighted)
Cardioid: 28 dB SPL
Supercardioid: 27 dB SPL

Signal-to-Noise Ratio (referenced at 94 dB SPL at 1 kHz)
Cardioid: 66 dB
Supercardioid: 68 dB

Dynamic Range (1 kΩ load at 1 kHz)
93 dB

Common Mode Rejection (10 Hz to 100 kHz)
45 dB minimum

Preamplifier Output Clipping Level (1% THD)
–8 dBV (0.4 V)

Polarity
3-Pin XLR: Positive sound pressure on diaphragm produces positive
voltage on pin 2 relative to pin 3 of output XLR connector.
5-Pin XLR: Positive sound pressure on diaphragm produces positive
voltage on pin 4 relative to pin 2 of output XLR connector.

Net Weight
MX405: 0.054 kg (0.119 lbs)
MX410: 0.068 kg (0.150 lbs)
MX400DP: 0.516 kg (1.138 lbs)
MX400SMP (w/ Kit): 0.125 kg (0.275 lbs)

Logic Connections
LED IN: Active low (≤1.0V), TTL compatible. Absolute maximum voltage:
-0.7V to 50V.
LOGIC OUT: Active low (≤1.0V), sinks up to 20mA, TTL compatible.
Absolute maximum voltage: -0.7V to 50V (up to 50V through 3kΩ).

Mute Switch Attenuation
–50 dB minimum

Cable
MX400DP: 6.1 m (20 ft) attached cable with shielded audio pair
terminated at a 3-pin male XLR and three unterminated conductors for
logic control

Environmental Conditions
Operating Temperature: -18–57 °C (0–135 °F)
Storage Temperature: -29–74 °C (-20–165 °F)
Relative Humidity: 0–95%

Power Requirements
48–52 Vdc phantom, 8.0 mA