Shure - Personal Monitor Systems - P6RE3 Wireless Bodypack Receiver with SCL3 Earphones

The P6RE3 Wireless Bodypack Receiver consists of the P6R Wireless Bodypack Receiver and gray SCL3 Sound Isolating Earphones.

PSM 600 Wireless Receiver with gray SCL3 Sound Isolating Earphones P6RE3 Wireless Bodypack Receiver with SCL3 Earphones

P6R Wireless Bodypack Receiver
	*Key Features*
	Rugged metal chassis
	*Operating Controls*
	Operating mode (Stereo, Mono, MixMode Volume knob Balance knob Defeatable limiter High frequency boost Frequency select
	*LED Indicators*
	Power RF reception Low battery

SCL3 Sound Isolating Earphones
Single WideBand Microdrivers with incredible isolation for detailed tone across the frequency range.
	Specifications<
	Frequency Range: 25Hz – 18.5kHz Sensitivity (at 1 kHz): 115 dB SPL/mW Impedance (at 1 kHz) 26 ohms Weight: 28g (.9oz) Output Connector: Gold-plated stereo, 3.5 mm (1/8-inch) phone plug Cable Length: 1.57 m (62 inches)

Spec Sheet (pdf)

RF Sensitivity: 1.2 µV typical
Image Rejection: 70 dB typical
Spurious Rejection: 60 dB typical
Squelch Threshold: 4 µV typical
Antenna Input Impedance: 50 ohms typical
Antenna: External, threaded connector
Power Requirements: 9 V battery
Battery Life: 46 hours, volume dependent
Audio Output Connector: 3.5 mm Stereo (Left = tip, Right = ring, Ground = sleeve)
Minimum Load Impedance: 16 ohms
Net Weight: 0.52 lbs.
Overall Dimensions: 27.18 mm X 64.52 mm X 85.09 mm (1.070 in. X 2.540 in. X 3.350 in.)

Receiver Antenna for the Shure P6R and P7R Receivers.