M44-7 and M44-7-H DJ Record Needles, Turntablist, Scratch

M44-7

Revived exactly the same as the original, this legendary battle needle offers ultra-high skip resistance and ultra-high output. The needle of choice for many champion DJ's worldwide, including The former Invisibl Skratch Piklz, X-ecutioners, and The World Famous Beat Junkies.  Engineered for scratch DJ's and turntablists, the M44-7 is designed not to skip under even the most demanding circumstances.

M44-7-H

Simplifying the setup for turntablists worldwide, Shure recently announced the release of the M44-7-H Turntablist Cartridge pre-mounted on a Technics headshell. Scratch DJs can now virtually eliminate setup time and install this model directly onto a turntable tonearm.

Engineered for scratch DJ's and turntablists, the M44-7 is designed not to skip under even the most demanding circumstances.

• Combining Shure's unique wide-diameter Type S cantilever with a tracking force of 1.5 to 3.0 grams, the M44-7's rugged construction is highly durable, but will not unduly wear your vinyl.
• With a 9.5 mV output, the highest on the market, the M44-7 produces very powerful, resonant sound.

• Skip Resistance: ultra high
• Output: ultra high
• Record Wear: ultra low
• Sound Emphasis: big bass

Replacement Needles: 

Tone Arm Mount

- Standard 1/2 inch

 

Cartridge Type

Moving Magnet

 

Output Voltage

Typical at 1 kHz

9.5 mV RMS at 5 cm/sec peak velocity

 

Recommended Load

47 kilohms in parallel with 450pf

 

Tracking Force

Effective at stylus tip

Range: 1.5 to 3 grams

 

Stylus Cantilever

Shure Type S

Heat-treated aluminum alloy / tubular

1.6 mil wall thickness / 34.5 mil diameter

 

Diamond Stylus Tip

Polished natural gemstone: Spherical

Radius: 0.7 mil

 

Frequency Response

Essentially flat from 20 to 17,000 Hz

 

Stereo Channel Balance

Within 2 dB

 

Channel Separation

Typical at 1 kHz: 20 dB

 

Net Weight

6.7 grams

 

Height

15.9 mm

 

Accessories Included

Attached flip-down Stylus Guard

Headshell Screwdriver (Phillips)

Extra Set of 4 Headshell Wires (4-99)

Stylus Cleaning Brush

Headshell Weight (3 grams)

User Guide

Mounting hardware

Stylus guard

 

Replacement Needles

Single with box & User Guide N44-7

4 Pack mounted on a card N44-7Q

12 Pack mounted on a card N44-7Z